Replacement Anchor Plates for B&W Biker Bar Motorcycle Tie Down

Question

Question:

do you guys sell the bottom plates for the biker bar, the 2 under the trailer. i would like to use this in my travel trailer but also want to keep the ones i have on my other trailer.

asked by: Armando C

0

Expert Reply:

We sure do! The part number you're looking for is # BWMC2305, which provides a pair of anchor plates.

expert reply by: Mike L

0

Answer 1

The Replacement Anchor Plates for B&W Biker Bar Motorcycle Tie-Down Systems part #BWMC2305 come with 5/8"-2.5" hex bolts.

view full answer...

Answer 2

The Replacement Anchor Plates for B&W Biker Bar Motorcycle Tie-Down Systems part #BWMC2305 does not come with the mounting hardware needed for installation. As you mentioned you can pick them up at your local hardware store. I recommend using…

view full answer...

Answer 3

I reached out to B&W about your #BWMC2301 and they said you need to take the kick stand and kick it out and over the bar itself. The kick stand is spring loaded and will move right over the bar. It should work with no problem. Generally you can…

view full answer...

Answer 4

I checked with B and W and the Biker Bar part #BWMC2300 would work well on your 2016 Harley CVO Breakout. They state that this fits all Harleys that have painted frames like what your bike has so it would work well.

view full answer...

Answer 5

There's no reason a Biker Bar like the #BWMC2300 couldn't be used in a Kendon folding trailer like you mentioned.

view full answer...

Answer 6

I spoke with our resident Harley guy about what he thought of the B&W Biker Bar Motorcycle Tie-Down System for Trailers #BWMC2301 if he were to use it with his bike. Since the bike frame is designed to support not only its own weight but also the…

view full answer...

Answer 7

The Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR is an excellent choice to tow any trailer that has between 1 to 3 axles (6 brake assemblies). The main feature is the control knob that mounts in dash or other easily accessible area, it…

view full answer...

Answer 8

The only thing I can think of that could cause an issue like this is that you have indicator light wired incorrectly to something that has power when not connected to the motorhome. In the typical setup you would connect the power for the indicator…

view full answer...

Answer 9

The Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System #BWMC2302B is the replacement bar that fits H-D Dyna, Softail, and V-Rod bike frames. The #BWMC2301B is the Replacement Clamping Bar for B&W Biker Bar Motorcycle Tie-Down for…

view full answer...

Answer 10

When measuring the pin box height you'll need to have the trailer level and the measure from the ground to the base of the king pin (pictured below). I recommend rechecking this measurement yourself since the dealership probably has zero clue…

view full answer...

Answer 11

The B&W Biker Bar Motorcycle Tie-Down System for Trailers #BWMC2301 and #BWMC2303 will use the same base so will attach to the trailer the exact same way, but it is the actual bar that attaches to the frame of the bike that will be different. The…

view full answer...

Answer 12

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Replacement Anchor Plates for B&W Biker Bar Motorcycle Tie Down

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching