Hitch Recommendation for 2018 Jayco White Hawk 29RE

Question

Question:

I have a 2018 jaco white hawk 29re has two rear slides what hitch would you recommend to pull an aluminum trailer with a honda 500 side by side

asked by: Michael G

0

Expert Reply:

The Curt hitch part # 13703 is the best option for a trailer hitch for your 2018 Jayco White Hawk 29RE as it's the most universal in design and has the needed capacity for the trailer you mentioned. It basically can fit all trailer frame styles as long as the channels are spaced between 22 and 72 inches apart.

I attached an install video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

An E1 error code on your Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU #FR93FR means that it tried to ignite twice but didn't have the correct amount of gas pressure. First check to make sure your gas valves are…

view full answer...

Answer 2

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer…

view full answer...

Answer 3

Hey Joe, yes the Lippert stabilizer jack part #LC298707 does fit your Grand Design Transcend 245RL but it is sold individually so if you wanted a set for the front and the rear you would need to order a quantity of two.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 8

I went out to our warehouse and test fit some SnapPads on the feet of the Lippert High-Speed Power Stabilizer Jack #LC298707 and found that the 6" square SnapPads were a fit. If your 2022 Forest River Vibe travel trailer only has one #LC298707…

view full answer...

Answer 9

If your Micro Minnie has a 4 inch x 4 inch channel bumper, I'd recommend the Curt #E-100. If you'd prefer a frame mounted hitch, I'd recommend the Curt #13703, which is compatible with box, C-channel or I-beam frames that are between 22…

view full answer...

Answer 10

The Timbren Trailer Suspension Enhancement System for Underslung Axles #T92MR is 5-1/4" tall. Timbren recommends The spring be in constant contact with the frame at all times. So ideally you will want exactly 5-1/4" from your axle tube to…

view full answer...

Answer 11

Yes, the Portable Power Watchdog Surge Protector #HU67FR is the Hughes part number PWD-30-EPO.

view full answer...

Answer 12

The newer brackets aren't currently sold separately but I've run into your situation a few times and have just placed the inner bracket on the t-molding instead of on the wall of the slide out. You'll want to get the lower holes in the…

view full answer...

Hitch Recommendation for 2018 Jayco White Hawk 29RE

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching