Is There a Ladder Rack and Hard Tonneau Cover that Can Fit 2018 Nissan Titan XD Short Bed

Question

Question:

Im trying to find a solution for my 2018 Titan XD King Cab that will allow me to carry a canoe on a truck rack, but also be able to install a hard bed cover or camper shell for a reasonable price. Are there any products that are compatible for this application? Id like to be able to transport the canoe, but also keep the bed covered while Im towing my travel trailer. Thanks!

asked by: Matt B

0

Expert Reply:

There is only one option for a ladder rack for your 2018 Nissan Titan XD 6-1/2 foot bed that will allow you to also install a hard tonneau cover and that's with the Thule TracRac SR part # TH43002XT-501 as it installs through the top of the bed rails which allows a tonneau that installs between the bed rails to also fit.

There's only one tonneau cover that has the correct clearance for your truck to fit with the base rails and not cause interference and that's the BAK Revolver part # BAK39524 as it's only one that rolls up narrow enough not to interfere with the base rails.

expert reply by: Jameson C

0

Answer 1

The only tonneau cover we can recommend with the TracRac Sliding Ladder Rack part #TH43002XT-501EX for your 2018 Nissan Titan XD with a 6-1/2 foot bed will be the BAK Revolver part #BAK48ZR as it's only tonneau cover that installs far enough to…

view full answer...

Answer 2

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 3

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 4

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 5

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 8

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 9

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 10

Hey Chad, so I'd actually recommend a mid size ladder rack like the Yakima OutPost HD Overland Truck Bed Rack #Y01152-58. This is by far going to be your best bet if you don't want to trailer your kayaks. These bars have a 500 lb weight…

view full answer...

Answer 11

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Answer 12

Actually our etrailer.com brand brake assemblies are rebranded AxleTek assemblies. So we have the 8k left and right assembly set #AKEBRK-8 which is most likely what you need but these are 12-1/4 inch in diameter by 3-3/8 inches wide and attach with a…

view full answer...

Is There a Ladder Rack and Hard Tonneau Cover that Can Fit 2018 Nissan Titan XD Short Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching