Correct RetraxPRO XR and Yakima OutPost HD Fits for a 2016 Ram 3500 Long Bed

Question

Question:

I have a 2016 RAM Dually-3500 long bed. You recommended the Yakima Y01152-5755 for use with the RTT-80233 tonneau cover but my truck bed is 65 inches across stake pocket to stake pocket and the Yakima rails are only 60 inches long. Are you sure this will fit? I have to wonder if the RTT-80233 will even fit. You dont offer a dually option in your vehicle selection -down list so I dont know if selecting the 3500 option really covers my truck.

asked by: Gary H

0

Expert Reply:

You are correct that the Yakima OutPost HD # Y01152-5755 with the 60" bars are too small. You'll want to use either the set with the 68" bars which is part # Y01152-5855 or the 78" bars which is part # Y01152-5955 instead. These will be wide enough for your 2016 Ram 3500 with the RetraxPRO XR Hard Tonneau Cover w/ Trax Rails # RTT-80233.

expert reply by: Jon G

0

Answer 1

I looked up the length of your 2013 Forest River Vengeance 396V and found it to be right at 41-1/2 feet which would be perfect for the #CA80-299-203101-RT that you referenced. This was designed for the types of applications you described in colder,…

view full answer...

Answer 2

The Classic Accessories PermaPRO Deluxe Extra Tall 5th Wheel Cover or Toy Hauler Cover - XT Model 7 #CA80-299-203101-RT is a fit for your 43 foot Fuzion Toy Hauler. This is a nice cover that has a some great materials suitable for all climates and…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 7

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Answer 8

Thanks for reaching out, Roy! The tie-down rails you see in the discussion video for your 2023 Ford F-150 Lomax Stance Hard Tonneau Cover #LOM76DR isn't something that we carry and it doesn't look like Lomax has them either, but we do have…

view full answer...

Answer 9

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 10

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 11

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...