Recommended 10 Inch Drums and Hubs for Electric Brake Conversion on Boat Trailer
Question:
I have a boat trailer with hydraulic surge brakes and 10inch drums. I saw your article about using Part numbers #23-105 and -106 to convert to electric brakes and the article said I would need to change my 10inch hubs/drums to 12. What part numbers would I need for the 12inch drums and hubs? Thanks!
asked by: Trey G
Expert Reply:
You don't need to convert from 10 inch drums to 12 inch. The brake mounting flange, the spindle size, and other components will not allow that anyway with your current axles. You can simply use the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA for the electric brake assembly on each axle and then use the Trailer Hub/Drum Assembly - 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 - Galvanized # AKHD-545-35-G-EZ-K.
Then for the wiring, I recommend using the # 12-1-1 and the Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector # HS381-9000. You simply want to disconnect the trailer connection before backing the trailer into the water. After pulling the trailer out of the water, wait a minute to let water drain before reconnecting to the tow vehicle.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Wiring Kit for Hydrastar Electric Over Hydraulic Actuators
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Wiring
- Hydrastar
more information >
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 6000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Q&A: What is Difference Between Dexter Hubs # # 8-201-9UC3-EZ and # 8-201-5UC3-EZ
- Q&A: Troubleshooting A Noisey Coleman-Mach RV Air Conditioner
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Difference Between Dexter Hub and Drums 42866UC3 & 42866UC3-EZ
- Q&A: Will MORryde Upgraded HD Shackle Kit Fit 2020 Grand Design 2670MK
- Q&A: Correct Replacement Braking Assemblies and Hubs for a 2009 Airstream PanAmerica
- Q&A: Replacement Hub with LM67048 Inner Bearing and LM11949 Outer Bearing
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Can the Bulldog Powered-Drive Kit be Used on Any Jack
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Replacement Automotive Lighting