Which Side of Inverter Does Go Power Remote Install On

Question

Question:

I bought the 34279950 and 34266886. Do I plug the Remote into the front or to the back of the inverter? Thanks

asked by: Terry C

0

Expert Reply:

The remote that you have # 34266886 plugs into the connector on the inverter # 34279950 that is on the side with the big black and red terminals. I attached a picture to show you what I mean.

expert reply by: Jameson C

0

click to enlarge

Answer 1

A battery disconnect switch (or circuit breaker) is needed for the 400 Watt Go Power Industrial Pure Sine Wave Inverter - GFCI #34282692, but if you want to be able to use it with a remote you will need to get one of the two remotes that work with…

view full answer...

Answer 2

From what you have described as your goal, my suggestion is one of two primary options, and I will note here that with either option I suggest you have a battery bank of at least 400 AH when fully charged. This first option is not an automatic…

view full answer...

Answer 3

If the two 12-volt batteries are wired in series and therefore put out 24 volts then the part #34280231 is correct since this is for a 24 volt system. If instead they are wired in parallel and put out 12 volts you'd instead need the #34279999…

view full answer...

Answer 4

To install the TorkLift PowerArmor Locking Battery Box #TLA7700L you'll need to use the included self-tapping screws to mount the box to your trailer tongue. You can do this either directly to your frame, using the extension brackets if they are…

view full answer...

Answer 5

The holes on the bottom of the TorkLift PowerArmor Locking Battery Box #TLA7700L aren't necessarily designed for mounting the box and are really there to allow moisture to escape and as access holes for wiring. According to the instructions there…

view full answer...

Answer 6

If your 2022 Chevrolet Tahoe does not have the factory tow package then the plug may not be there. If this is the case you would need to hardwire in a brake controller. If your Tahoe does have the tow package then the plug will be under the dash. The…

view full answer...

Answer 7

The Torklift Battery Mounting Box part #TLA7708R or #TLA7700L that you referenced can mount to the brackets you have on your trailer as there are several holes on the bottom of the box that you can use to run bolts through to then attach to your…

view full answer...

Answer 8

I reached out to my contact at TorkLift regarding the PowerArmor Locking Battery Box #TLA7700L and he said that the only thing that really differentiates this from other boxes with regards to Lithium battery compatibility is its physical size.…

view full answer...

Answer 9

When the brake pedal is depressed it will send out 12v power through the brake light switch wire to the Tuson DirecLink Base Model Trailer Brake Controller #335DL-100, telling it to activate the brakes on the trailer.

view full answer...

Answer 10

The TorkLift PowerArmor Locking Battery Box for 6V and 12V Lithium Batteries #TLA7700L is designed for Lithium batteries. Lithium batteries are typically taller and more narrow so this battery box is designed to better support that size. The box…

view full answer...

Answer 11

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 12

The base of the Torklift PowerArmor Battery Box is 31-1/8 inches long and the width is 8-7/8 inches.

view full answer...

Which Side of Inverter Does Go Power Remote Install On

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching