Bolt Diameter of Dexter Single Axle Heavy Duty Suspension Kit

Question

Question:

What is diameter of bolts in this kit? In need 9/16 in diameter for my 3500 Dexter axle with 1-3/4 in leaf springs. Thanks

asked by: Gary P

0

Expert Reply:

The bolts in the Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00 are 9/16" diameter like you need.

This kit is designed for and will work with your 1-3/4" wide, double eye leaf springs.

I have added a link to a video review for you to check out as well of the Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00.

expert reply by: Kyle S

0

Answer 1

The MORryde Suspension Upgrade Kit #MR48ZR is designed for trailers with Correct Track suspension and 3-1/8" shackle bolt center to shackle bolt center. You will need to confirm that your 2008 Jayco triple axle fifth wheel has the Correct Track…

view full answer...

Answer 2

The shackle straps included in the Lippert Tandem Axle Equa-Flex AP Kit - Wet Bolts - 3-1/8" Long Shackles #LC64FR you mentioned are 3-1/8" center to center and 4-3/8" overall length as shown in included diagram. Using the longer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 5

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 6

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 7

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 8

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 11

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Answer 12

I am sorry I don't have any tires that are going to fit your rim. I do have a couple of comparable size tires that come in a wheel tire combo. I have listed the two below along with their lug patterns. 5 on 4-1/2 Lug Pattern - Kenda 205/65-10…

view full answer...

Bolt Diameter of Dexter Single Axle Heavy Duty Suspension Kit

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching