Locking Hitch Pin for Curt Premium 4 Bike Hanging Rack

Question

Question:

Is there a way to lock the entire rack to the hitch so someone can’t steal the entire hitch?

asked by: Brent

0

Expert Reply:

To add a locking hitch pin to the Curt # C18064 you can use the SportRack Hitch Lock - # SR0901, which doubles as an anti-rattle hitch pin, as well.

expert reply by: Erik B

0

Answer 1

When using a trunk-mounted bike rack such as the Yakima Fullback 2, #Y02634, the back tailgate on your 2008 Acura MDX will need to remain closed when the rack is on. If access to your rear storage area is something you value, there are still options…

view full answer...

Answer 2

The Anti-Rattle Hitch Lock #SR0901 is the only locking hitch pin that I can find that will work with the Curt Premium 4 Bike Rack #C18064. These both have the 1/2" threaded bolts while the Threaded Anti-Rattle Hitch Pin Lock #e99047 has a…

view full answer...

Answer 3

Good news, I went out and grabbed the Anti-Rattle Hitch Lock for SportRack Bike Racks and Cargo Carriers #SR0901 and one of the Curt Premium 4 Bike Racks part #C18064 that you also referenced to test the two and found that the hitch lock fits the…

view full answer...

Answer 4

Both of these Thule racks will do an excellent job of safely and economically hauling four bikes (assuming you aren't using a Class I hitch, which has a manufacturer recommended limit of hauling two bikes at a time). The Camber #TH9056 is lighter…

view full answer...

Answer 5

Any hitch for any vehicle will deliver its rated tongue weight and gross towing capacities only if installed exactly according to the manufacturer's instructions. Both the correct grade of fasteners (which are included, by the way) and their…

view full answer...

Answer 6

The hitch specs of the Thule Camber #TH9056 are written in a way that could be confusing. So the line in the description is: Application: 1-1/4" x 1-1/4" (Class I and Class II) and 2" x 2" trailer hitch receivers What this means…

view full answer...

Answer 7

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 8

It is going well and I'd be happy to help you! For a 2024 Honda CR-V Hybrid Sport, I recommend the etrailer Hitch item #e98848 you were looking at. We have confirmed through our vendor and customer reviews that this hitch will fit the hybrid…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

While we don't currently have an installation video for the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector #CU86FR on a 2022 Honda Pilot, we do have an installation video for the Tekonsha #118286 on a 2020 Honda Pilot. The…

view full answer...

Answer 12

The best option we have for an RV approved 2" hitch receiver 4-Bike rack is the Thule Range #TH9057. This is has been rated and approved for use with anything from a small passenger vehicle up to a travel trailer (which has the harshest ride…

view full answer...

Locking Hitch Pin for Curt Premium 4 Bike Hanging Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching