Replacement Idler Hub Recommendation for a 1997 Four Winns Trailer
Question:
What is the best hub assembly for my boat trailer? Picture attached
asked by: Kristoffer E
Expert Reply:
Since you have a boat trailer you're going to want to use a galvanized idler hub assembly like part # AKIHUB-545-35-G-K which is for a standard spindle or part # AKIHUB-545-35-G-EZ-K which is the same thing just with a dust cap for an EZ Lube spindle.
To confirm that this will fit your boat trailer you're going to want to pull a hub and check your bearing and seal numbers. These hubs have an # L68149 inner bearing, an # L44649 bearing, and a # 58846 grease seal which has a 1.719" inner diameter.
If you aren't able to confirm bearing and seal numbers then you can use a digital caliper and measure where the bearings and seal rides on your spindle (see attached).
![Jon G](https://images.etrailer.com/static/images/catg/people/1086_tn.jpg)
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: Bearing Repacking and Grease Seals Installation
- Shop: Replacement Race for 25580 Bearing
- Shop: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Q&A: Replacement Bearings for a AL-KO 92655 Hub
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Q&A: Replacement Hub for 2003 Four Winns Boat Trailer
- Q&A: Edge Programmer Compatible with 2005 Ford F-250 Super Duty with 5.4 L V8 Engine
- Q&A: How To Find the Correct Axle Replacement for a Four Winns Tandem Axle Boat Trailer
- Search Results: 15123
- Search Results: 442109
- Search Results: 25580
- Search Results: 15245
- Search Results: 22550
- Search Results: 25520
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Search Results: l68149
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Article: Trailer Tire Sizing
- Shop: Suspension Enhancement