Can You Back Up With Curt Tow Bar with Adjustable-Width Arms on Jeep Wrangler

Question

Question:

Can you back up with the v system tow bar for jeep wrangler

asked by: Robin G

0

Expert Reply:

According to the linked installation instructions of the Curt Tow Bar with Adjustable-Width Arms # C19745 you should not back up with your Jeep Wrangler attached because it may damage the vehicle.

I have added a link to a video review as well of the Curt Tow Bar with Adjustable-Width Arms # C19745.

expert reply by: Kyle S

0

click to enlarge

Answer 1

We had a customer send us a picture of the Curt Tow Bar part #C19745 attached to the front bumper of a YJ just like your 1995 Wrangler that I attached to this page for you to check out.

view full answer...

Answer 2

As long as your vehicle's towing capacity is not exceeded by the toad vehicle you should be fine. I recommend using something like Curt Tow Bar with Adjustable-Width Arms - Car Mount #C19745, which is a coupler style tow bar that connects to a…

view full answer...

Answer 3

There is no specific speed rating associated with the Curt Tow Bar with Adjustable-Width Arms #C19745. When using this or any other tow bar you are going to want to not only follow your local laws but look in your tow vehicle's owner's manual…

view full answer...

Answer 4

The Curt tow bar #C19745 will have to connect to your bumper the same way it has been, there is no D-ring adapter for this tow bar. For your lights you need to use tow bar wiring, not trailer wiring. I'm not sure what year your Jeep is but you…

view full answer...

Answer 5

For starters, you'll need a base plate kit like #118-3 which is a fit for 2 door Geo Tracker models only. From the photo you provided, it appears you're missing the crossbar that the #RM-020 uses, unless you already have it an it just…

view full answer...

Answer 6

Before you begin purchasing the necessary equipment needed to flat-tow your 1986 Suzuki Samurai, you will want to review the "recreational towing" section of your owner's manual for any certain stipulations when flat towing your…

view full answer...

Answer 7

Roadmaster replacement crossbar/adapter #RM-025 will fit the XL base plates you have, #711-4. But in order to make the XL arms easily removable with this bar you will also need Quick-Disconnects #RM-201. I took some measurements of the bar and have…

view full answer...

Answer 8

The total length of the Tow Ready Tracker Tow Bar, part #63180 when measured from the end of the coupler to the vehicle attachment points is 46 inches. There isn't a set length that a tow bar has to be in case that is your question. If this tow…

view full answer...

Answer 9

I went to the warehouse and took some measurements of the Roadmaster Replacement Swivel Collar, part #RM-9200-4 for you. I have attached a photo of the collar and the measurements are noted. The hole for the pin is 1/2-inches diameter. The hole…

view full answer...

Answer 10

I went to the warehouse and found that the Replacement Swivel Collar #RM-900010-00 measures about 1-5/8" on the inside. This part is a direct replacement for the Roadmaster Tracker Tow Bar #RM-020.

view full answer...

Answer 11

You can use the Curt Tow Bar with Adjustable-Width Arms #C19745 that comes with bumper brackets on your 2004 Jeep TJ, though you will need to find a way to mount the bumper brackets. These will require a flat metal part of your bumper, which nearly…

view full answer...

Answer 12

If your Chevrolet Equinox has a Curt #C28FR (70108) base plate kit you can install a Blue Ox tow bar without an adapter as they are compatible. Blue Ox does not recommend using their tow bars beyond 10 years for full-timers. You should probably get…

view full answer...

Can You Back Up With Curt Tow Bar with Adjustable-Width Arms on Jeep Wrangler

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching