Hitch and Towing Accessory Recommendation for 2016 Mazda CX-5
Question:
My 2016 Mazda CX-5 Grand Touring is listed as having a 2000 lb. towing capacity. I am buying a hitch for the purpose of using a bike rack, but its possible that I could tow something else in the future. Should I get the 1 1/4 or the 2? The used bike rack Im getting from a friend is for a 1 1/4, so if I get a 2, what is the cost of getting an adaptor?
asked by: Gail
Expert Reply:
Because there are many more 2 inch receiver compatible hitch mounted accessories available, we typically recommend going with the 2 inch receiver if the option is available. The Curt Class III part # C13315 that you'd looked at is actually what I'd recommend. This is a concealed crossbar hitch, so when installed only the receiver tube and safety chain loops will be visible. The remainder of the hitch will be hidden by the bumper.
The reducer which would allow you to use the bike rack is part # HT02. You can see current pricing by clicking the provided link.
If you're planning on towing, you'd also need a trailer wirng harness like # 118563, a ball mount like # 2753 and a trailer ball like # 19260 for a 1-7/8 or # 63845 for a 2 inch ball.
I've linked to installation videos for the hitch and the trailer wiring hanress.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
- Hitch Adapters
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- No Extension
- Fits 2 Inch Hitch
- 2 Inch to 1-1/4 Inch
- Brophy
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Which Hitches are Made in the USA
- Q&A: Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado
- Q&A: Recommended 2-Inch Trailer Hitch For 2024 Mazda CX-5
- Q&A: Difference Between Curt & etrailer Trailer Hitches For 2024 Subaru Crosstrek Wilderness
- Q&A: Mazda CX-5 Signature Hitch Installation and Trim Removal
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: 2024 Mazda CX-5 Trailer Hitch and Wiring Recommendations with Mounting Brackets
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Is Trimming Required to Install the etrailer Hitch # e98902 on My 2021 Mazda CX-5?
- Article: My Trailer Hitch Doesn't Fit
- Article: Ball Mount Basics: Weight Capacity, Class, and Size