Replacement L-Pin Kit for Equal-i-zer Weight Distribution System # 90-00-1000

Question

Question:

Is there a replacement pin for this model?I need a replacement pin for #90-00-1000

asked by: Debbie K

0

Expert Reply:

The replacement L-pin part # EQ95-01-9430 that you referenced is the correct kit for your Equal-i-zer kit EQ90-00-1000 # EQ37100ET that you have.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver #13432 you found is for Jeep Wranglers and will not be able to fit your 2023 Ford Bronco. While we currently have not received any updates that the Curt Trailer Hitch Receiver #C76WR which fit the 2021 and 2022 model…

view full answer...

Answer 4

The Bargman breakaway switch that you have is still sold to this day. Basically, you can use any breakaway switch that you would like. They are a very simple device. Once the pin is pulled it completes the circuit from the breakaway battery and the…

view full answer...

Answer 5

Yes, you can use two of the Replacement Handheld Remote for Maxxair Roof Vent Intake/Exhaust Fans - Qty 1 #MA00A01150K in the same RV since they're point and click remotes and will need to be able to see the fan itself to function. With that…

view full answer...

Answer 6

The 18 inch long Equal-i-zer weight distribution shank part #EQ90-02-4600 does give most trucks and trailers the ability to tow with the tailgate down like it sounds like you are planning on doing and like what you see in the attached picture. Now…

view full answer...

Answer 7

Most WD shanks that fit a 2-1/2" receiver taper down to the normal 2" receiver size, just like the Equal-i-zer Shank #EQ90-02-4700. The only thing that you need to be sure of is that the mounting holes are in the same space. I have linked a…

view full answer...

Answer 8

The SportRack Cargo Carrier for 2" Hitches #SR9851 has a shipping weight of 67-lbs. This figure includes the packaging so the actual net weight of the cargo carrier itself is approximately 63-lbs. The 2-inch Class III hitch receivers we offer…

view full answer...

Answer 9

For your Dometic Duo Therm PDX 57915.622 we have the replacement shroud part #DMC69FR as a confirmed fit. The color will be more of an off-white than the white of your old shroud but this will still fit and work great.

view full answer...

Replacement L-Pin Kit for Equal-i-zer Weight Distribution System # 90-00-1000

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching