Available 5.70 x 8 Tire Without a Wheel Included for 1974 Cushman Truckster

Question

Question:

cannot find 5:70 - 8 tires without the rim. To fit a 74 Cushman Truckster with custom matching painted rims. Only need the tires !

asked by: James A

1

Helpful Expert Reply:

We have just what you're looking for with the Kenda # AM10013, which is a 5.70 x 8 tire without a wheel. I've linked a short review video of this tire for you to have a look at, as well.

expert reply by: Erik B

1

Answer 1

A larger trailer tire basically wins in every category like you mentioned. Less rolling resistance, less affected by bumps in road for smoother ride quality, and bearings/hub spins less so in theory less wear and tear. So as long as you have room for…

view full answer...

Answer 2

My research into the Cushman Truckster utility vehicle suggests this came with 4-lug wheels that were indeed fitted with 5.70-8 size tires. Such wheels and tires are displayed on the page I linked for you. I also linked a helpful article on trailer…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 7

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 8

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Available 5.70 x 8 Tire Without a Wheel Included for 1974 Cushman Truckster

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching