Will the Thule Passage 3 Bike Carrier Fit a 2016 Toyota Highlander

Question

Question:

I have a 2016 Toyota Highlander Limited. Will this bike rack model fit my year/model car? Thanks,

asked by: Tammy V

0

Expert Reply:

The Thule Passage 3 Bike Carrier part # TH911XT is not listed as a fit for a 2016 Toyota Highlander according to Thule but I do have an option for you that is, the Saris Bones 3 Bike Rack part # SA801BL is a confirmed fit for your Highlander. I have attached a video of the 2-bike version of the Saris Bones # SA805BL, which is also a fit for your Highlander, for you to see all of its great features.

expert reply by: Conner L

0

Answer 1

If your trailer has a straight tongue, like a boat or kayak trailer, then you might have enough room under your bikes to be able to use the Malone Runway Trunk Bike Rack #MPG2142 on your 2016 Toyota Highlander while also towing, but there are…

view full answer...

Answer 2

The trailer hitches we currently have available that are confirmed to fit your 2003 Toyota Corolla are all Class I hitches. The different class ratings for trailer hitches primarily refer to the maximum weight the hitch can safely handle. The size of…

view full answer...

Answer 3

Class I and Class II trailer hitches both have a 1-1/4 inch receiver. That is where the similarities end though. Class I hitches are rated for less weight, typically maxing out at 2,000 pounds gross trailer weight and 200 pounds tongue weight. Class…

view full answer...

Answer 4

The #S64152-2 Swagman Original 3-Bike Rack weighs in at just under 25 lbs. It can accommodate 3 bikes weighing up to 35 lbs apiece. This is a very durable bike rack that can certainly take whatever you dish out. I've linked you to a product…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 7

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 12

For an e-bike rack for your Letric XP step thru bikes at the rear of an RV the Swagman E-Spec part #S94FR would be a great choice as it's rated for the rougher ride quality at the rear of RVs, has the higher weight capacity needed at 60 lbs per…

view full answer...