Amp Rating, Wire Gauge, and Dimensions of On/Off Push Button Switch for RV Lighting

Question

Question:

what size? DC? Amp rating? Dimensions of the part that goes inside the light fixture? Thanks

asked by: Steve

0

Expert Reply:

I reached out to the manufacturer who was able to provide me all the specs for the On/Off Push Button Switch for RV Lighting # DG52453VP (White/Gold) and # DG52452VP (Black).

I have added cut outs of the dimensional drawing for you which has the size of the switch. It is rated for up to 14 volts DC and 10 amps; the wires are 18 gauge.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The dimensions on the threaded mounting housing of the On/Off Push Button #DG52452VP is 7/16" in diameter. This is the smallest push button switch we have available. I've also added a photo to show these dimensions.

view full answer...

Answer 2

I went out to the warehouse and pulled a Lippert jack #LC285318. Based on what I saw there are screws that enter from the bottom half of the housing and hold on the top part of the housing. These very narrow holes will require a long and thin…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

view full answer...

Answer 9

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 10

The best modern day size replacement option we have for a 6.00-16 is a 235/80-16 which measures 30-7/8" diameter x 9-3/8" wide. For this, I recommend the Kenda Karrier ST235/80R16 Radial Trailer Tire with 16" Black Mod Wheel part…

view full answer...

Answer 11

That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity don't…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Amp Rating, Wire Gauge, and Dimensions of On/Off Push Button Switch for RV Lighting

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching