How to Attach Pace Edwards Ladder Rack to My 2014 Chevrolet Silverado

Question

Question:

I bought a used Pace Edwards utility ladder rack for my 2014 Chevy Silverado Ext can with a 61/2 ft bed. It didnt come with rails to attach to the bed.can I buy these? And where??

asked by: Ronald F

0

Expert Reply:

The Pace Edwards Utility Rig Rack # 311-UR3014 is a nice addition to a Pace Edwards Tonneau Cover on your truck. Since the ladder rack attaches to an existing tonneau cover rails you will need to have a tonneau in place for the ladder rack to work with your truck. The rails are attached to the canister that houses the tonneau cover. Pace Edwards has a lot of tonneau options but the ladder racks only work with the Explorer Series Rails. The Explorer Series Rails have a slot in them that allows you to install your ladder rack to your tonneau cover.

The nice thing about Pace Edwards is that you get the best of both worlds and you don't need to take a tonneau off to attach a ladder rack. You get full bed protection when it is closed and when you open it you get most of your bed while not blocking your back glass all while still having the capability of using the ladder rack the entire time.

The JackRabbit # 311-JEC95A17, Full-Metal JackRabbit # 311-FEC95A17 and the Bedlocker # 311-BEC95A17 are fits for your 2014 Chevrolet Silverado that include the explorer series rails. We have not had the opportunity to shoot a video with the Explorer Series Rails but these will give you a good idea of how the tonneau works,

expert reply by: Zach D

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

The "KTC 7600" stamped on the brake pad doesn't look to be a part number, so I can't cross reference it, but we do know you have Kodiak ceramic brake pads. So to determine the correct brake pads, all you need to do is match up…

view full answer...

Answer 6

Yes, the TrackTowers part #Y52AV does fit into Yakima HD tracks like what you have installed on your trailer.

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

How to Attach Pace Edwards Ladder Rack to My 2014 Chevrolet Silverado

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching