Advice for Routing Power Wire for Tekonsha Trailer Wiring on 2020 Subaru Ascent
Question:
Do you offer any technical advice on how and where to run the black power wire from the module to the battery? The instructions with the kit say to run it inside or outside. Pretty general. More advice would be helpful.
asked by: Steve S
Expert Reply:
Basically all of the instructions for trailer wiring like the Tekonsha # 118290 for your 2020 Subaru Ascent are kind of vague when it comes to routing the power wire to the battery which is why we came up with a helpful article on this (see attached).
Although it seems like a pain, the easiest way to route the wire is by going under the vehicle. If there are any places where you can run the wire through the frame of your vehicle then do that as it will be the easiest way to avoid damage to the wiring. Otherwise try to avoid any hot or moving areas so that your wring will be safe. We found it easiest to follow the brake lines as those are put in safe locations from the manufacturer so you can rest easy with the wire there.
Use zip ties to keep the wiring from sagging and then also try to shoot for fairly straight shots so that you don't have to get extra wire to reach your battery.
If you have any other questions just let me know!
Product Page this Question was Asked From
Tekonsha OEM Replacement Vehicle Wiring Harness with 7-Way Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 7 Round - Blade
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Brake Controller
- Shop: Trailer Hitch
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Mounting Bracket and Installation Hardware - Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End
- Shop: Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Connector
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Installing The Redarc Tow-Pro Elite Brake Controller In A 2022 Subaru Ascent
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: brake controller
- Video: Tekonsha T-One Vehicle Wiring Harness Installation - 2021 Subaru Ascent
- Q&A: Recommended/Easiest to Install Brake Controller for 2022 Subaru Ascent
- Search Results: 3062~p
- Search Results: c56040
- Video: etrailer Class III Trailer Hitch Installation - 2020 Subaru Ascent
- Q&A: Can Weight Distribution Hitch Be Used On 2021 Subaru Ascent
- Q&A: Will Installing The SumoSprings CSS-1094R On A 2020 Subaru Ascent Lift The Rear When Unloaded?
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Best Hidden Trailer Hitch Receiver For 2021 Subaru Ascent
- Shop: Suspension Enhancement
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: Hidden Hitch Recommendation for 2020 Subaru Ascent
- Video: Tekonsha T-One Vehicle Wiring Harness Installation - 2020 Subaru Ascent
- Video: Pollak 7-Pole RV-Style Trailer Connector Review
- Video: Review of Redarc Trailer Brake Controller - Brake Controller for Tekonsha Wiring Harness - RED63RR
- Video: Redarc Tow-Pro Liberty Brake Controller Installation - 2018 Toyota 4Runner