How to Remove Lens from Optronics Porch Light on 2019 Rockwood Mini Lite 2109S

Question

Question:

How does this lens pop off?

asked by: Steven I

0

Expert Reply:

You will need to either put some upwards or downwards pressure on the lens and then rotate it outwards to gain access to the inside of the RV Porch Utility Light w/ Switch # RVPL7C for changing the light bulb, mounting it, or replacing the Clear Lens # APL5CB.

We haven't had the chance to install this light yet but if you check out the linked install video for the RV Porch and Utility Light # RVPL1A you'll get an idea of what I'm talking about.

expert reply by: Jon G

0

Answer 1

I have a solution for you, but from what I was able to determine, the Rockwood 2109s is 22'-4" long, so the #290-52240 is going to be just a tad too short. Instead, the SFS AquaShed #290-52272 would be the correct size cover for your…

view full answer...

Answer 2

The lens on the RV Oval Porch and Utility Light #RVPL7C is held to the housing with some tabs on the lens that fit slots on the housing. To remove the lens you will need something thin and flat like a knife or small screwdriver to gently pry the…

view full answer...

Answer 3

Trailer makers don't keeps specs on items like lights but if you can get a look at the light's base that is where you will usually find a part number and perhaps a brand name for the whole light. You may need to remove the base from…

view full answer...

Answer 4

The RV Scare Light, RVSL31, uses an 1156 bulb. A white LED 1156 like #DI85VR would fit the socket. This light has not been tested with LED bulbs though so I cannot guarantee that it will work.

view full answer...

Answer 5

We do have some motion activated porch lights but part #RVSL31 from Optronics is not one of them. I've linked our complete selection for you. I personally own and use part #DG0132 at my house and it's doing great. It stays on a dim…

view full answer...

Answer 6

Yes, the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans part #FVK8017-00 is the correct replacement fan/motor for your Fan-Tastic Vent Create-A-Breeze Model 8000.

view full answer...

Answer 7

The Create-A-Breeze roof vent is a Fan-Tastic Vent Roof Vent Fans and from your description you have a model 8000 vent. The correct replacement is the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans #FVK8017-00. I have added a…

view full answer...

Answer 8

Since we don't carry the exact light you have the best option we have for a replacement lens would be an all new assembly like the RV Porch Light part #RVPL7C that you referenced.

view full answer...

Answer 9

Thanks for the picture of your trailer light lens. Based on seeing that we do know that the part #OPT47FR is the correct replacement.

view full answer...

Answer 10

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 11

When measuring for a trailer cover you want to measure from the front of the trailer box, not the tongue, to the rear including anything that is attached to the rear. This will include a spare or a ladder at the farthest edge at the rear of the…

view full answer...

Answer 12

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the…

view full answer...