Replacement U-Bolt for Sears Sport 15-CAV Cargo Box

Question

Question:

I need a set of U Bolts for my Sears SPORT 15-CAV box that would fit the Rola Sport Rex Roof Rack for flush side rails I purchased yesterday. I will probably have to drill new holes in the box. Can you help?

asked by: Daniela D

0

Expert Reply:

While there isn't an exact replacement, the holes in your Sears Sport 15-CAV Cargo Box should be about 4 inches apart, and for replacement U-bolts with that dimensions I recommend the Replacement U-Bolt # TH02943.

expert reply by: Kyle S

0

click to enlarge

Answer 1

I spoke to my contact at Thule and she told me that there were a couple different generations of the Sears Sport 15-CAV and they have replacement lock hardware that would work for one of the generations, but without knowing what generation you have…

view full answer...

Answer 2

We have replacement keys for your Sears X Cargo 20 series cargo carrier. In order to get the correct one you will need to know the key number of your current setup. If you do not have a key to get the part number off of, the lock on the cargo box…

view full answer...

Answer 3

The threaded portion of the u-bolts in the RhinoRack Crossbar Fit Kit, part #S280, measures 1-1/8 inches. This kit consists of 4 u-bolts, 8 plastic knobs with threaded steel inserts, 8 washers, 8 plastic caps for ends of the u-bolts, and 4 metal…

view full answer...

Answer 4

I went out to the warehouse and pulled replacement u-bolt #853-3105 to take some measurements. The width between the two ends is approximately 2-7/16 inches. The center to center distance though is 2-11/16 inches. The internal length is 3-1/2 inches…

view full answer...

Answer 5

The Sear cargo boxes were made for them by Thule. Although the original mounting kits are no longer available it is easy enough to adapt another u-bolt mounting kit to work well on this rooftop cargo box. It really just depends on the type of roof…

view full answer...

Answer 6

We do offer replacement mounting hardware kits for your Karrite Voyager rooftop cargo box. The best choice for replacement mounting hardware for your Karrite Voyager cargo box is our kit #TH05603. This kit consists of u-bolts, plates and knobs to…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

It sounds like you already have a roof rack with round crossbars for your 2018 Chevy Cruze; your Sears X-Cargo Sport 20 cargo box will mount directly to those with the standard mounting hardware. If you need to replace the standard mounting hardware…

view full answer...

Answer 9

Thanks for reaching out, David! The hardware you need to mount the Sears X-Cargo roof box on your 2019 Kia Sorento is the Hardware Kit #TH05603. I'm not sure what the crossbar spread range is for the X-Cargo box so you might need to drill new…

view full answer...

Answer 10

For some reason Toyota isn't very forthcoming with how to figure out if you have the tow package or not. From my understanding all of the V6 models of the 2019 Toyota Highlander have the tow package but it isn't specified as to what else…

view full answer...

Answer 11

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 12

Hey Tom, I checked with Tekonsha and it does look like the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter #TK57VR does work with a 2024 Grand Highlander. For a brake controller I'd actually suggest going with one of…

view full answer...

Replacement U-Bolt for Sears Sport 15-CAV Cargo Box

Product Page this Question was Asked From

Continue Researching