Replacement Mounting Hardware Kit for Karrite Voyager Rooftop Cargo Box

Question

Question:

Hello there, bought a cargo carrier xl voyager sportrack a couple years back. Do you have a plates parts for it?

asked by: Paul S

0

Expert Reply:

We do offer replacement mounting hardware kits for your Karrite Voyager rooftop cargo box. The best choice for replacement mounting hardware for your Karrite Voyager cargo box is our kit # TH05603. This kit consists of u-bolts, plates and knobs to secure the carrier on your vehicle roof rack.

expert reply by: Adam R

0

Answer 1

Yes, it is very likely that replacement key #THKEYN2826 will fit your Voyager XL cargo box with lock 2826. Sometimes with newer keys and older boxes the new key will have to be tapped into the lock to seat all of the way. So if they key doesn't…

view full answer...

Answer 2

For your Karrite Voyager, you will need to remove your current locks and replace them with #SR03807. If you need the latch and the guides, you will use #SR00841 and #TH03808.

view full answer...

Answer 3

We have had customers in the past use the Thule keys on their Pep Boys Voyager XL. For lock cylinder that says 2806 you need Replacement Key part #THKEYN2806.

view full answer...

Answer 4

The Thule Replacement U-Bolt for Thule Sidekick Cargo Box #TH02943 will be the correct fit for your Karrite Voyager Cargo Box. The U-bolt is 4 inches on center and 2 inches deep. Then you can use the Replacement Wingnut for Thule Cargo Boxes #TH04877…

view full answer...

Answer 5

Thank you for the photo! I enhanced the image and based on that it looks like your lock number is 2808 and we do have a replacement with that number for your Karrite Explorer Rooftop Carrier; you will simply need to order Replacement Key for…

view full answer...

Answer 6

We have exactly what you need! To replace the key for the 2818 lock core on your Karrite Voyager Cargo Box you just need the part #THKEYN2818. This will work perfectly with your existing box. It will come with 1 key so you may want to order a couple…

view full answer...

Answer 7

Yes, the Replacement Key for Thule Racks and Carriers #THKEYN2808 is the correct replacement key for your Karrite Voyager. This key will work on your Karrite because The Thule Group does in fact own, Karrite.

view full answer...

Answer 8

While there isn't an exact replacement, the holes in your Sears Sport 15-CAV Cargo Box should be about 4 inches apart, and for replacement U-bolts with that dimensions I recommend the Replacement U-Bolt #TH02943.

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Replacement Mounting Hardware Kit for Karrite Voyager Rooftop Cargo Box

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching