Kwikee 32 Series RV Step Replacement Module and Door Switch

Question

Question:

help! is this the part I need I have kwikee series 32 step on a 1993 winibago Vectra motor home? also would I need to replace the door switch?

asked by: Tom M

0

Expert Reply:

The correct replacement control module for your Kwikee Series 32 Steps is the Lippert Components Kwikee Control Unit part # LC379606. The door switch kit you'd need then is the part # LC369311.

expert reply by: Jameson C

0

Answer 1

I'm sorry to hear about your steps and I did check with the manufacturer, Lippert, and the Coachsteps like your 168367 are no longer in production, so the frames by themselves are not available. So you would need a new step assembly, and I was…

view full answer...

Answer 2

We've checked in the past and Lippert/Coachstep no longer offers just the step frame you are needing for your 168367. So you would need a new step assembly, and I was able to find the correct replacement for your 168367 steps: - Replacement…

view full answer...

Answer 3

To go to a Kwikee Series 42 style step you would need the part #LC372779 which comes with everything but the switch kit which we offer separately with the part #LC369311. There isn't any adapter type solution based on what you have now that would…

view full answer...

Answer 4

The Lippert Components Kwikee Step Switch Magnet (1812971) #LC369299 is most likely what you need. I recommend the Lippert Components Kwikee Step 1 SWITCH PACK W/POWER SWITCH N/O (905325000) #LC369311 to give you the on/off switch as well in case you…

view full answer...

Answer 5

According to Lippert, the correct replacement for your 9010000464 model Kwikee Revolution Steps is the Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - Revolution Series #LC3725791. If you want the complete assembly with the…

view full answer...

Answer 6

That's exactly why you need to use electric steps like what we see with the Kwikee Series 42 #LC372779 steps. Class A motorhomes just have that one entrance which would make it too difficult to utilize a pull down step like the Lippert SolidStep…

view full answer...

Answer 7

This is a fairly common occurrence for motorhomes that are wired to work with a normally open circuit and the steps being used are designed to work with a closed circuit. To fix this issue, you'd just need to swap out your door magnet with the…

view full answer...

Answer 8

If the manufacturer of your steps is Lippert Components or Stromberg Carlson then the Replacement Door Switch for Lippert Electric Coach Step, Item #LC301694, is what you need. Lippert Components and Stromberg Carlson manufacture most of the OEM…

view full answer...

Answer 9

The easiest way to get the step and switch kit you are wanting is with the part #LC3747453 would work on your 2019 Ford E-450 to provide it with a single step that is retractable.

view full answer...

Answer 10

The correct replacement control for your 1510000140 step control is the Replacement Control Unit for Kwikee #LC363985. Since most of your functions seem to be working correctly, I would start by checking the 4-way connector before replacing the…

view full answer...

Answer 11

You have an older version of the Kwikee 39 Series RV step which used the type of plunger switch you described that is no longer available but you can use the part #LC379407 that you referenced.

view full answer...

Answer 12

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Kwikee 32 Series RV Step Replacement Module and Door Switch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching