Retractable Single Step Kit that Can Fit 2019 Ford E-450

Question

Question:

Hi, I have a 2019 Ford E450, and I needed a single electric step and the automatic switch for it as well. Would these two products meet my needs? LC3747452 and LC369311 Thanks,

asked by: Than L

0

Expert Reply:

The easiest way to get the step and switch kit you are wanting is with the part # LC3747453 would work on your 2019 Ford E-450 to provide it with a single step that is retractable.

expert reply by: Jameson C

0

Answer 1

There should be a positive and negative wire that comes from your furnace. One being Therm+ and other being Therm-. Therm+ needs to be capped off and Therm- needs to run to the brown/white wire of the Advent thermostat control. You might need to…

view full answer...

Answer 2

I'm sorry to hear about your steps and I did check with the manufacturer, Lippert, and the Coachsteps like your 168367 are no longer in production, so the frames by themselves are not available. So you would need a new step assembly, and I…

view full answer...

Answer 3

To go to a Kwikee Series 42 style step you would need the part #LC372779 which comes with everything but the switch kit which we offer separately with the part #LC369311. There isn't any adapter type solution based on what you have now that…

view full answer...

Answer 4

According to Lippert, the correct replacement for your 9010000464 model Kwikee Revolution Steps is the Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - Revolution Series #LC3725791. If you want the complete assembly with the…

view full answer...

Answer 5

The Lippert Components Kwikee Step Switch Magnet (1812971) #LC369299 is most likely what you need. I recommend the Lippert Components Kwikee Step 1 SWITCH PACK W/POWER SWITCH N/O (905325000) #LC369311 to give you the on/off switch as well in case you…

view full answer...

Answer 6

We're familiar with this issue which happens when the incorrect switch is used. Kwikee Steps use two different magnetic switches. One is a normally open circuit and the other is normally closed circuit. The switch must match the controller.…

view full answer...

Answer 7

This is a fairly common occurrence for motorhomes that are wired to work with a normally open circuit and the steps being used are designed to work with a closed circuit. To fix this issue, you'd just need to swap out your door magnet with the…

view full answer...

Answer 8

We've checked in the past and Lippert/Coachstep no longer offers just the step frame you are needing for your 168367. So you would need a new step assembly, and I was able to find the correct replacement for your 168367 steps: - Replacement…

view full answer...

Answer 9

If the manufacturer of your steps is Lippert Components or Stromberg Carlson then the Replacement Door Switch for Lippert Electric Coach Step, Item #LC301694, is what you need. Lippert Components and Stromberg Carlson manufacture most of the OEM…

view full answer...

Answer 10

The correct replacement control for your 1510000140 step control is the Replacement Control Unit for Kwikee #LC363985. Since most of your functions seem to be working correctly, I would start by checking the 4-way connector before replacing the…

view full answer...

Answer 11

That's exactly why you need to use electric steps like what we see with the Kwikee Series 42 #LC372779 steps. Class A motorhomes just have that one entrance which would make it too difficult to utilize a pull down step like the Lippert SolidStep…

view full answer...

Answer 12

You have an older version of the Kwikee 39 Series RV step which used the type of plunger switch you described that is no longer available but you can use the part #LC379407 that you referenced.

view full answer...

Retractable Single Step Kit that Can Fit 2019 Ford E-450

Product Page this Question was Asked From

Continue Researching