Recommended 8" x 6.5" Wheels for Zero Turn Lawn Mower

Question

Question:

I need an 8” rim for my 0 turn mower it is 6.5”wide and has 4 lug holes X 4” on center! It fits a 18 X 6.5 - 8.0 nhs turf tire. Can you help me?

asked by: Max S

0

Expert Reply:

The Steel Trailer Wheel part # AM20021 is the best option we have for you and it works great for most lawn mowers. It measures 8" diameter x 7" wide so it will be a bit wider than the one you have now but that actually should not be too much an issue if you replace both. These will work just fine with 18x6.5 tires.

expert reply by: Conner L

0

Answer 1

The size 165/65-8 is the modern size name for your 16.5 x 6.5 -8 so we have exactly what you would need. If you have a 4 on 4 inch bolt pattern wheel currently you would want the part #AM3H200. If you have a 5 on 4-1/2 inch bolt pattern you would…

view full answer...

Answer 2

The tire on the Kenda 165/65-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C #AM3H200 has a speed rating of 65 mph. This wheel and tire combo has a maximum capacity of 800 lbs (per wheel/tire) and fits a 4 on 4"…

view full answer...

Answer 3

Your 6-1/2-inch wide mower tires are a 165mm width in metric terms and in a wheel/tire of this size with the 4-bolt lug pattern we offer Kenda #AM3H200 which is size 165/65-8. This is our only pre-mounted wheel tire with this tire size. This is NOT…

view full answer...

Answer 4

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Recommended 8" x 6.5" Wheels for Zero Turn Lawn Mower

Product Page this Question was Asked From

Continue Researching