Crossbar Solution for Rhino rack Pioneer Platform Cargo Tray

Question

Question:

Hello, I have a RhinoRack pioneer universal 42114B. Do you sell indivdual parts for this unit? I am looking for the fixed crossbar from this unit. There is no part number on the parts diagram, but its labeled 10. I would also want a set of the Plastic Tabs part M753. THanks!

asked by: Scott M

0

Expert Reply:

To add a set of rails that will go all the way around your Pioneer Platform tray # RR42114BF you'd want the part # RR43189B but a set of front and rear bars are not available for the tray. We do not have a way to get the tab part number you mentioned though.

expert reply by: Jameson C

0

Answer 1

To get the correct measurement of your leg distance, which is the measurement used to fit your fairing, you'll need to measure the distance between your roof rack legs while it is installed. This will let you know what fairings are too big,…

view full answer...

Answer 2

Since the Rhino-Rack Vortex Crossbar System #RRVA180B-RRRLT600 is made specifically for Trax systems on the Retrax XR tonneau models like the #RTT-60243, I reached out to my contacts at both Retrax and Rhino-Rack. Through the information I gained…

view full answer...

Answer 3

The Rhino-Rack Sunseeker Awning, part #RR32133, mounts to either the Rhino-Rack Pioneer Platform or the T-slots of other crossbars. Your 2017 Honda CR-V with factory crossbars do not have T-slots, so your only option is to attach a Pioneer…

view full answer...

Answer 4

From the photo that you provided as well as some additional research, the factory crossbars do have top channels. The discontinued Inno Shaper 80 Roof Cargo Basket is compatible with most aero and elliptical crossbars with those top channels. If…

view full answer...

Answer 5

The compatibility of the Inno Shaper 100 Roof Cargo Basket - Channel Mount - Aluminum - 46-1/2" x 41-7/8" - 110 lbs, part #INXA569, with the factory roof rack on your 2019 Toyota CH-R, will depend on whether your roof rack has…

view full answer...

Answer 6

THe Rhino Rack Premier part #RR42115BF doesn't have a vehicle fit list but if your crossbars are less than 3-5/8 inches in width it will fit.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 12

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Crossbar Solution for Rhino rack Pioneer Platform Cargo Tray

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching