Will the iN-Command TPMS Send Alerts In the Background

Question

Question:

To receive alerts in the tow vehicle, does the iN-Command TPMS app need to be displayed on my smartphone, or can it also be running in the background with other apps such that I can display a map app for navigation?

asked by: Doug

1

Helpful Expert Reply:

The iN-Command TPMS for RVs, Trailers, and Vehicles part # NCTP100 will still send alerts if running in the background. That said, you need to be careful not to close the app but so long as you don't you will be fine.

expert reply by: Conner L

1

Answer 1

I spoke with ASA Electronics about whether or not the iN-Command TPMS for RVs, Trailers, and Vehicles #NCTP100 is compatible with your Smart Trailering system, and they said that their #NCTP100 system is not compatible with the Smart Trailering…

view full answer...

Answer 2

Yes; you are looking for the iN-Command TPMS for RVs, Trailers, and Vehicles - Bluetooth - 4 Waterproof Tire Sensors #NCTP100, which is compatible with Chevy's smart trailer integration. It's a really great feature that Chevy has been working…

view full answer...

Answer 3

Yep! The iN-Command RV Tire Pressure Monitoring System #NCTP100 was designed to be compatible with the iN-Command setup you have on the center console of your 2020 Chevy Silverado 2500 so it will be visible on your truck's display.

view full answer...

Answer 4

The sensors in the kit are compatible with any standard rubber or metal valve stem, so unless your Cougar uses a unique or rare style of valve stem, you will not need to use different ones. The iN-Command Tire Pressure Monitoring System #NCTP100 can…

view full answer...

Answer 5

Yes, the iN-Command TPMS for RVs, Trailers, and Vehicles #NCTP100 is compatible with your 2022 Chevy Silverado 3500. Chevy uses Smart Trailer which has been integrated with iN-Command. This means you do not need an additional display. You will also…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…

view full answer...