Is a New Controller Needed When Changing the Gear and Motor On Kwikee 32 Series Steps

Question

Question:

Will my controller still work on my model 32 if I upgrade the gearbox an motor

asked by: Millard I

0

Expert Reply:

In order to upgrade the motor and gear box on a set of Kwikee 32 Series Steps you'll need a full kit, the Motor Upgrade Kit for Kwikee Electric RV Steps part # LC379145 which comes with the controller as well.

expert reply by: Conner L

0

Answer 1

The Motor Upgrade Kit for Kwikee Electric RV Steps part #LC379145 is a very popular upgrade kit which works with most Kwikee Steps. In order to confirm this is correct you'll need to look for the series number of your steps which should be on a…

view full answer...

Answer 2

I reached out to my contact at Lippert who said that if you keep getting a fuse that blows when everything is connected for your Kwikee 39 Series Steps then something is going on with your wiring. You either have a damaged (pinched or exposed wire)…

view full answer...

Answer 3

In order to find out what is the correct replacement step motor for a 1999 Tiffin Allegro Motorhome, you need to know which series steps it has and when they were made. This info is found on a white label on the steps themselves. There will be a part…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Is a New Controller Needed When Changing the Gear and Motor On Kwikee 32 Series Steps

Product Page this Question was Asked From

Continue Researching