Recommended Axle To Use Off-Road Jeep Wheels/Tire On Trailer
Question:
I am getting a custom built off-road trailer and would like to be able to put the same tires and wheels that are on my Jeep. So still 5x5 bolt pattern and the tires are BFG km3’s 35x12.5R17 and the rims are fuel hostage rims with a -12 offset and 4.5 backspacing and 87.10 bore size. What kind of axle less setup would I need? Also the trailer would only be about 1,500 lbs maybe 1,900 loaded down.
asked by: Jacob F
Expert Reply:
I have the perfect axle and hub setup for you to use off-road wheel and tires on a trailer, the Timbren Axle-Less Trailer Suspension System part # ASR1THDS03 with the Trailer Idler Hub Assembly part # AKIHUB-550-35-EZ-K. This setup has an integrated lift which you'll want if taking the trailer off-road, an extended spindle arm so you can clear larger tires, and it will come with hubs which have the 5 on 5" bolt pattern. The only advice I have would be to mount the axle and wheels/tires before making the fenders.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2.2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2.2K
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt - 2K
- Shop: Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Q&A: Jeep Wheel Compatibility with Timbren Axle-Less Trailer Suspension System
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-550-35-K
- Shop: Washer For 1" Spindle
- Q&A: Hub Recommendation for Timbren Axle-Less System ASR1THDS03 with Jeep Bolt Pattern
- Q&A: Using Wheels From Jeep Wrangler on Tandem Axle Trailer
- Q&A: How to Use Jeep Wheels with a Timbren Axle-Less Trailer Suspension System
- Q&A: Parts Needed To Switch a 3,500LB Axle To 5 on 5" Idler Hubs on 5X8 Utility Trailer
- Shop: Trailer Wiring
- Search Results: wheel studs
- Search Results: torsion axle
- Search Results: dexter axle
- Search Results: dexter torsion axle
- Search Results: surge brake kit
- Q&A: Recommended Axle-Less Trailer Suspension System to Replace Axle on Truck Bed Trailer
- Q&A: Recommended Trailer Axle Kit for Fabricating Off-Road Utility Trailer
- Search Results: 1000 lb leaf springs
- Search Results: trailer corner markers
- Video: Dexter Electric Trailer Brake Kit Installation 23-26