Does Air Lift Suspension Enhancement Fit AL76KV Fit 2020 Ford F-350 with OEM Rail Kit  

For a 2022 Ford F-350 both the #AL76KV and #AL23FJ are a fit and would work well. The part #AL23FJ also fits the F-250 which means that it was designed initially for the F-250 but they found it also fit the F-350 whereas the #AL76KV will only fit…

The best air bag kit for your 2022 Ford F-350 that has a single rear wheel axle is the part #F95FV which has the 5,000 lb capacity you are wanting. Firestone bags are superior Air Lift bags. The ply rating of the rubber is higher, the attachment to…

For your 2022 Ford F-250 Air Lift makes a LoadLifter 5000 kit that fits with the in-bed hitch with the part #AL57391 but the part number you mentioned does not fit. This will do a great job providing additional suspension support when you are towing…

For your 2020 Ford F-350 long bed 4WD the best air bag kit for rear suspension enhancement is going to be the #F95FV which has the highest weight capacity at 7500 lb, and has the highest overall bag quality. Then for a compressor kit that has a…

I recommend the Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle #AL23FJ. It will work with your 2020 F250 Fx4. This system lets you manually adjust air-pressure on either side of your truck to help even out loads and smooth out your ride. The…

We have exactly what you are looking for. For your 2020 Ford F-350 FX4 Single Rear Wheel I recommend the Air Lift LoadLifter 5000 Air Helper Springs #AL35FJ which is a confirmed fit and will give you up to 5000lbs of load leveling support when towing…

The only air bag kit currently available for a 2020 Ford F-350 FX4 is from Firestone, the Firestone Ride-Rite Red Label Air Helper Springs part #F95FV. This kit was actually just redesigned for the FX4 models. I know you were looking at AirLift but…

The only difference between the Firestone Ride Rite Red Label 5000-lbs Air Bags #F35FV and the 7500-lbs Air Bags #F95FV is the material that they are constructed with; both air bags will be the same size, but the 7500-lbs air bags are constructed…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.