Front Mount Trailer Hitch for 2020 Chevy Silverado 2500

Question

Question:

Do you have a front mount hitch available for a 2020 Silverado 2500?

asked by: David D

1

Helpful Expert Reply:

Yes, the EcoHitch Front Mount Hidden Trailer Hitch part # EH57FR is a confirmed fit for a 2020 Chevrolet Silverado 2500.

expert reply by: Conner L

1

Answer 1

To add a front mounted hitch to your 2023 Chevy Silverado 3500. You will want the EcoHitch Hidden Front Mount Trailer Hitch Receiver item #EH57FR. This hitch is custom fit and bolts to your Chevy with included hardware. This front mounted hitch has a…

view full answer...

Answer 2

There is a front mounted hitch for your 2023 Chevy Silverado 2500. It is the EcoHitch Hidden Front Mount Trailer Hitch Receiver item #EH57FR. This hitch is custom fit and bolts to your Chevy with included hardware. This front mounted hitch has a…

view full answer...

Answer 3

There is a Hidden Hitch item #EH57FR for your 2020 Silverado 3500 but it does not mount between the tow hooks because of your diesel trucks intercooler. There's no room there for the hitch to exit between the tow hooks so it has to come out…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

In regards to the Curt Front Mount Trailer Hitch Receiver part #C52NR which is a fit for a 2022 GMC Sierra 2500, the tow hooks do not need to be removed. I have attached a photo below which shows both the trailer hitch and tow hooks in place. I have…

view full answer...

Answer 11

The Curt Front Mount Trailer Hitch Receiver #C52NR will fit your 2024 GMC Sierra 2500 AT4 but you will need to trim the rock guard in order for the hitch to fit.

view full answer...

Answer 12

For a 2024 Chevrolet Silverado 3500 with a diesel engine you will want the EcoHitch Hidden Front Mount Trailer Hitch item #EH57FR. This hitch is custom fit and bolts to your Silverado with included hardware. It has been confirmed to fit all models of…

view full answer...

Front Mount Trailer Hitch for 2020 Chevy Silverado 2500

Product Page this Question was Asked From

Continue Researching