What is the Difference Between Lippert Landing Gear Motors LC241795 and LC196308

Question

Question:

.

asked by: Paul B

0

Expert Reply:

The two motors are for very different applications. The part # LC241795 is a replacement for the Lippert Ground Control 2.0 system which is an auto leveling landing gear setup and the # LC196308 is for a heavy duty landing gear set.

Can you get me any info/part numbers you can find on your Raptor's landing gear? With that I can see if there's a replacement out there.

expert reply by: Jameson C

0

Paul B.

5/6/2020

.

Reply

Jameson C.

5/6/2020

.

Reply

Answer 1

I can certainly understand wanting to look for a more cost effective alternative but the motor and gear box for the Lippert Ground Control Leveling Systems are sold as one unit. The correct motor and gear box for your Lippert Ground Control 2.0…

view full answer...

Answer 2

I called my contact at Lippert and asked about the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor, part #LC141893. The LC141893 is designed for an LCI landing gear with a weight capacity of 5,000 lbs. If you need a motor for a…

view full answer...

Answer 3

There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the…

view full answer...

Answer 4

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Really you're going to need to measure the distance where the leveling system is going to be installed. If that distance is more than 20', then you're going to want the 6 point Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling…

view full answer...

Answer 8

The correct replacement for your 1-065-041012-01 motor is part #LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson #LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice. You'll…

view full answer...

What is the Difference Between Lippert Landing Gear Motors LC241795 and LC196308

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching