Can I Unplug Edge CTS Tuner After Tune Is Installed

Question

Question:

Can I unplug my edge cs programmer after I’m done loading the tune to my truck

asked by: Joe

0

Expert Reply:

You can unplug the Edge CTS3 tuner like part # EP69YR after the tune is installed on the truck and the tune will not be affected. The tuner would need to be plugged in to use the display or the change the tune levels.

expert reply by: Heather A

0

Answer 1

In order to factory reset an Edge Gas Evolution CTS3 Performance Tuner #EP59YR you will need to go through the following steps. 1. Enter the Quick Link menu. 2. Press the Settings icon. 3. Scroll through the list and select "Factory Reset".…

view full answer...

Answer 2

Yes! You can unplug the monitor for the Edge Evolution #EP69YR and hide it or keep it with you when you leave the truck. After the truck has been tuned the tune is held by the truck's computer. This is what allows you to remove the monitor. When…

view full answer...

Answer 3

Yes. Once your Edge Diesel Evolution CTS3 #EP69YR is finishing running the tune on your vehicle, it can be unplugged. I've linked an installation of one of these tuners on a truck for you to have a look at, as well.

view full answer...

Answer 4

Before you traded your truck in you should have uninstalled the Edge Gas Evolution CTS3 Performance Tuner - Color Screen #EP59YR from the vehicle. This programmer can only be installed onto one vehicle at a time. If you didn't remove the tune…

view full answer...

Answer 5

The Edge Diesel Evolution CTS3 #EP69YR that you referenced is designed to work with the stock 2015 Chevrolet Silverado 3500. Since it is designed to work with stock vehicles, it will work with the stock DPF on your 3500. I confirmed this with my…

view full answer...

Answer 6

For your 2003 Chevrolet Silverado with 6.6L V8 Duramax Diesel Engine, I recommend the Edge Diesel Evolution CTS3 Performance Tuner #EP69YR. This tuner has preset levels to maximize the engine's potential. The 5-inch resolution, full-color touch…

view full answer...

Answer 7

Yes, the Edge CTS3 Programmer part #EP69YR is easy to install and is a confirmed fit for your 2004 GMC Sierra with a 6.6 liter diesel engine. It will give you up to 135 horsepower and 240 ft lbs of torque so you'll notice quite a bit of…

view full answer...

Answer 8

I checked with Edge and the correct CTS3 Performance Tuner (with 5" screen) for your 2001 Chevy Silverado 2500 with the 6.0L gas engine is the part #EP39YR. The Edge Evolution CTS3 #EP69YR that you referenced is designed for the diesel engine…

view full answer...

Answer 9

No, the Edge Diesel Evolution CTS3 #EP69YR will allow you to reach Power Level 3: 135 HP & 240 LB-FT on your 2015 GMC Sierra 2500 without additional accessories. Please note that 135 HP & 240 LB-FT was the max that was tested. This was under…

view full answer...

Answer 10

Yes, the Edge Diesel Evolution CTS3 Performance Tuner part #EP69YR is a confirmed fit for a 2003 Chevrolet Silverado 2500/3500 with 6.6L Diesel Engine and Allison Transmission. It can provide increases in power of up to 100 HP and 210 TQ. It can also…

view full answer...

Answer 11

To disconnect or unpair an Edge Gas Evolution CS2 Performance Tuner #EP85350 or touchscreen #EP59YR, you simply need to reset his truck to factory settings. This will unpair the device and allow it to be used on another compatible vehicle. Without…

view full answer...

Answer 12

That means the programmer you have was installed on a different vehicle and wasn't returned back to stock before you got it. These can only be programmed to one vehicle at a time, so you'd have to track down the original vehicle the…

view full answer...

Can I Unplug Edge CTS Tuner After Tune Is Installed

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching