Availability of USA Made Trailer Jack for Boat Trailer
Question:
Do you carry a USA made weld on tongue jack for my fishing boat? Thank you
asked by: Joe K
Expert Reply:
We do have some weld-on jacks that are made here in the USA. These come from Dutton-Lainson and have a 2,000 lb weight capacity. Part # DL22685 is a pipe-mount swivel jack while part # DL22680 is a bracket-mount swivel jack. I personally like the look of the bracket version better but they will both perform about the same.
It is worth noting that while these are made in the USA, they do have just a standard powder coat finish on them so they will show signs of wear quicker than other models that are made specifically for boat trailers like the Fulton Bolt-Thru Swivel Marine Jack # FXP15W rated for 1,500 lbs tongue weight. Fulton is a well-known name in the jack industry so if you plan on going boating on a regular basis you might consider going with something like this instead. This mounts to the trailer with the weld-on bracket # P9012-00.
Products Referenced in This Question
Pull Pin, Easy Swivel Trailer Jack with Foot - Topwind - 10" Travel - 2,000 lbs.
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Swivel Jack
- Topwind Jack
- 10 Inch Lift
- Weld-On
- With Rectangle Foot
- Dutton-Lainson
more information >
Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Jack Mounting Bracket for Fulton Marine Jack - Weld-On
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Mounting Hardware
- Brackets
- Fulton
more information >
Product Page this Question was Asked From
Pipe Mount Swivel Style Trailer Jack with Foot - Sidewind - 10" Travel - 2,000 lbs.
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Pipe Mount
- Weld-On
- With Rectangle Foot
- Dutton-Lainson
more information >
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 4 Bolt Flange - 2,000 lbs
- Shop: Ark Xtreme Off-Road Swivel Trailer Jack w/ 2 Wheels - Sidewind - 12" Lift - Zinc - 770 lbs
- Shop: Pipe Mount Swivel Style Trailer Jack with Foot - Sidewind - 10" Travel - 2,000 lbs.
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Video: Ark Sidewind Extreme Off-Road Swing-Up Trailer Jack Review
- Video: Dutton-Lainson Pipe Mount Swivel Style Trailer Jack with Foot Review
- Q&A: Trailer Jacks Manufactured in the USA
- Q&A: Distance From the Foot to the Mounting Bracket on the Bulldog Pipe Mount Swivel Jack 158109
- Q&A: How to Mount the Bulldog Pipe Mount Swivel Sidewind Jack BD158109
- Search Results: weld on jack mount
- Search Results: tongue box
- Shop: Brake Controller
- Shop: A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson
- Shop: RC Manufacturing T-Series Trailer Tongue Tool Box - A-Frame - Steel - 2.6 Cu Ft - Black
- Shop: RC Manufacturing T-Series Trailer Tongue Tool Box - A-Frame - Aluminum - 5.2 Cu Ft - Silver
- Search Results: trailer wire gauge
- Q&A: What Gauge Wire Is Required On a 7-Way Connector
- Search Results: ark
- Search Results: corner jacks
- Search Results: progressive dynamics inverter
- Q&A: Ideal Leaf Spring Hanger Spacing for Tandem Axle Trailer Using # e34SR 6000 lb Leaf Springs
- Q&A: Hanger Spacing for 3500 LB. Tandem Axle Trailer
- Q&A: Length of Equalizer 013-105-04 in Dexter Heavy Duty Suspension Kit # K71-360-00
- Article: Determining Trailer Tongue Weight
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Choose the Right Trailer Hitch Class
- Article: What is the Best Trailer or RV Storage Cover
- Article: Trailer Tire Sizing
- Article: Slipper Spring Trailer Suspension System Review
- Article: Most Popular Wheel Bearings