Will the 2-Speed Boat Trailer Winch with 20' Strap Work On a 21' Long Boat

Question

Question:

I’m looking for a 2 speed winch for my boat trailer. Have a 21 foot boat on a roller trailer currently look at 315-w3200d would this be sufficient enough? Thank you for your time.

asked by: Michael D

0

Expert Reply:

The 2-Speed Boat Trailer Winch with 20' Strap part # 315-W3200D is an excellent option for a 21 foot long boat. Generally speaking, you'll want the strap to match the length of the boat or close so this is a great option.

In regards to weight, the rollers will help significantly with this so there will be no issues even with heavier boats.

expert reply by: Conner L

0

Answer 1

We have some very similar winches to the Shelby 5466 that you have but we do not carry Shelby winches any longer. The Shelby is a 2 speed winch with a 2,300 lb capacity so for a very similar winch we have the Dutton Lainson 2 speed winch part…

view full answer...

Answer 2

Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short winching distance the ratio increases to 3 to 1, but with…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The plunger pins are usually specific to the brand of jack and usually are not interchangeable. Unfortunately, without knowing the manufacturer and model number of your existing jack, I cannot say with certainty that the pin will work for you. I have…

view full answer...

Answer 5

The correct brake controller harness for your 2023 Ford E-350 to install a Tekonsha Prodigy P3 part #90195 is the part #22292. The connector on your E-350 is in a really unusual location behind the vents above the stereo. To see how to access it…

view full answer...

Answer 6

The key number you referenced having is associated with an older Diversitech ball mount. I do have an option available for you to consider, however we do not currently carry the replacement key for the R3223 model as it's not available. If you…

view full answer...

Answer 7

It is always a good idea to use a winch that is overrated for the purpose you will be using it for. A winch that is used near the bottom end of its capacity will last much longer then a winch used at the top end of its capacity. We do have wire rope…

view full answer...

Answer 8

We offer two Paneloc lock hasps that are 1-1/2-inches wide, parts #H145-203E and #H135-203E, both of which are shown on the linked page. We also offer cam door latches like 2-inch #PLR158-102-A and #PLR158-102-SS, as well as 1-inch hasps like…

view full answer...

Answer 9

Since you have carpeted bunks you need a winch rated for the entire weight of your boat (with roller bunks you can get away with a lower-rated winch) so I recommend the following from Bulldog Winch: - 12K Bulldog Winch Trailer Winch - Wireless Remote…

view full answer...

Answer 10

The Dutton-Lainson #DL15440 Two Speed Winch you mentioned should be exactly what you need. As you said, you want to choose a winch whose capacity is at least 50 percent of the weight of your boat. Since the #DL15440 winch has a capacity almost equal…

view full answer...

Answer 11

The part you are looking for is the Brass Connector for Titan Disc Brake Kit, #T4750300. This is the fitting that threads into the master cylinder that accepts the reverse lockout solenoid on your Titan actuator. I have attached a link to this part…

view full answer...

Will the 2-Speed Boat Trailer Winch with 20' Strap Work On a 21' Long Boat

Product Page this Question was Asked From

Continue Researching