What Does Viking Solutions Stack Rack II 2-Level Cargo Carrier for 2" Hitches # 310-VSR201 Weigh

Question

Question:

How much does this product weigh?

asked by: Zachary T

1

Helpful Expert Reply:

The Viking Solutions Stack Rack II 2-Level Cargo Carrier for 2" Hitches # 310-VSR201 weighs 41 lbs.

expert reply by: Jameson C

1

Answer 1

The dimensions of the bottom basket of the Viking Solutions Stack Rack II 2-Level Cargo Carrier for 2" Hitches - Steel - 300 lbs, part #310-VSR201, are approximately 32" L X 17" W X 8" D. The distance from the top of the bottom…

view full answer...

Answer 2

The Viking Solutions Stack Rack II 2-Level Cargo Carrier for 2" Hitches part #310-VSR201 is a two level system. That said, if you only require one level you can simply omit the upper tray during installation to make for a single level system.…

view full answer...

Answer 3

While we do have a two-tiered basket system that offers more storage space, Viking Solutions does not not have an option to make the top basket of the Stack Rack II #310-VSR201 the same dimensions as the larger bottom basket. The only other option we…

view full answer...

Answer 4

If you want to carry two kayaks your options would be carrying them on the roof of your vehicle or carrying them on a trailer. I cannot recommend a roof rack without knowing the year, make, and model of your vehicle. If your vehicle is rated to tow a…

view full answer...

Answer 5

Depending on the size and weight of your kayaks a Trailer #MAL93FR is going to make the most sense for carrying 2 kayaks. The Viking Solutions Stack Rack #310-VSR201 would be difficult to carry kayaks with since the kayaks are going to be wider than…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

What Does Viking Solutions Stack Rack II 2-Level Cargo Carrier for 2" Hitches # 310-VSR201 Weigh

Featured Help Information

Miscellaneous Media

Continue Researching