Adding a Brake Controller to my 2000 Chevrolet Silverado with a 4-way Currently on it.
Question:
have 4 line set up already for this 2000 Chevrolet Silverado want to add electric towing.. according to video I need: 39510 3025-p 37185 10-2-1 3185917 185916 and a 30 amp fuse.. Is this correct and is there a package deal on this? Thank you for your help.
asked by: Ken B
Expert Reply:
We can get you exactly what you need to install a brake controller and you have figured it out with a few small part number changes. We have done just as you said and made a kit of the common components.
For the Tekonsha Voyager Trailer Brake Controller use part # 39510 and part # 3025-P. This is the controller and pigtail to plug it in.
Next you want part # ETBC7 this is the kit we have put together to do just this. It includes the 7-way with bracket, duplex wire to run to the front of the truck and a small addition not in the video of a circuit breaker for the power wire to prevent any issues with overload or shorts.
In addition you will need 2 nuts one of part # 185917 and one of part # 185916. You will also need the maxi 30 amp fuse while I don't carry that it is available at any parts store.
With these parts and the attached video you mentioned you will have trailer brakes in no time. Happy Hauling!
Products Referenced in This Question
Zinc Plated Hex Flange Nut - M6
- Accessories and Parts
- Trailer Brake Controller
- Hardware
- Nuts
- Hex Nut
- Flint Hill Goods
more information >
Zinc Plated Hex Flange Nut - M8
- Accessories and Parts
- Trailer Brake Controller
- Hardware
- Nuts
- Hex Nut
- Flint Hill Goods
more information >
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Tekonsha Voyager Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Manual Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- Indicator Lights
- Up to 90 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Must-Have Flat Towing Components
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Q&A: Choosing Between the Brake Buddy Select 3 and the Blue Ox Patriot Supplemental Braking System
- Article: Flat Towing Package for 2018 Jeep Wrangler JL and JL Unlimited
- Article: How to Choose a High-Low Adapter
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Q&A: Is The Curt C96JR Tail Light Kit Compatible With A Brake Buddy Brake System?
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar
- Q&A: Recommended Flat Towing Parts for a 2024 GMC Canyon Denali
- Q&A: Rear Sway Bar and SumoSpring Kit for 2011 Itasca Cambria to Improve Handling
- Q&A: Complete Flat Towing Setup for a 2024 Ford Maverick
- Q&A: What Is Needed To Safely Flat Tow A 2023 Chevy Silverado 1500