Which Replacement Converter Section for Progressive Dynamics 4060 Control Center

Question

Question:

I Have a pd 4060 Is this compatible? Replacement Converter Section for Progressive Dynamics 4000 Series RV Power Control Center - 60 Amp # PD4060CSV

asked by: Brian

0

Expert Reply:

Yes. The Replacement Converter Section # PD4060CSV is compatible with your existing Progressive Dynamics Inteli-Power 4000 series Power Control Center- this is a 60 amp converter so it is the exact replacement part you're looking for. I've also linked a review video that you may find helpful.

expert reply by: Erik B

0

Answer 1

The current version of the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4060K does have a switch that allows you to switch to lithium batteries. But this switch didn't get incorporated until 2020. From the picture…

view full answer...

Answer 2

The part #PD4060CSV that you referenced is compatible with lithium batteries as there's a small switch on it that allows it to change between the two. It has a tiny microswitch right near the coil that has two positions, one marked LA (lead acid)…

view full answer...

Answer 3

Thanks for the pictures! The switch didn't get added to the item #PD4060K until 2020. It looks like from your pictures yours does not have it. If this is the original converter that came with your 2018 Forest River that explains why it's not…

view full answer...

Answer 4

If put a voltmeter on the leads that run to the battery you should see the voltage increase when the converter is powered. To replace just the converter section of it you'd just want the part #PD4060CSV and you'd be set. It's not a…

view full answer...

Answer 5

The main differences between the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4060K and the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4560K18LS8 are their amperage and…

view full answer...

Answer 6

The converter output of the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger part #PD4060K should be between 12.6 and 13.6 VDC depending on if a load is present. If you're seeing more than this then it would indeed…

view full answer...

Answer 7

So the #PD4045CSV was recently redesigned so that it could switch between lithium batteries and non-lithium batteries where in the past it was only non-lithium. This is why other part number is getting discontinued.

view full answer...

Answer 8

The Replacement Converter Section for Progressive Dynamics 4000 Series RV Power Control Center part #PD4045CSV has a lithium mode that when stitched on will provide a constant charge of 14.6 volts. It does not reduce the charge so you'd need to…

view full answer...

Answer 9

Since you've already checked the input voltage for your Progressive Dynamics converter the last thing for you to do is check the output voltage. If you don't get any output voltage then you'll want to replace the converter. We have a…

view full answer...

Answer 10

Yes, the Replacement Lithium Converter for Progressive Dynamics 4500 Series RV Power Control Center part #PD4575LICSV is the correct replacement for a Progressive Dynamics PD4575. It will be a direct replacement without requiring any cable…

view full answer...

Answer 11

If you replace your PD4045CS with the part #PD4045CSV you'd have ability to switch between lead acid and lithium battery types like you are wanting to. I attached a link to a page that has wiring diagrams for you to check out as well. This comes…

view full answer...

Answer 12

Typically when this happens we recommend replacing the charger section of your #PD4045KA with the #PD4045CSV but looking at the fan that's on the circuit board it appears to be a standard computer style fan. So if you could find a computer repair…

view full answer...

Which Replacement Converter Section for Progressive Dynamics 4060 Control Center

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching