Can Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers be Used for a Boat Trailer

Question

Question:

Will this work on a tandem axle boat trailer?

asked by: Richard

0

Expert Reply:

The Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers # EZ-JACK is a universal product so it can theoretically be used for any trailer on the market.

If you have a specific situation that you think it might not work for (like axle or suspension design) then just let me know and I can help you determine if this is still a solution for you or not.

expert reply by: Jon G

0

Answer 1

Since you have a tandem axle trailer the easiest solution for jacking up the trailer to allow the flat to be changed is the Blaylock EZ Jack part #EZ-Jack. You would just need to roll the good tire on the side of the trailer up on this wedge and the…

view full answer...

Answer 2

The Entry Plate #34273840 that came with your Solar Package #34282181 is capable of supporting up to the same 30 amps as your solar controller. Each of the 200 amp panels for the Expansion #34282182 is rated at 9.57 amps so you will be able to add…

view full answer...

Answer 3

That's a great question. The manufacturer doesn't exactly provide this information so I went out to our warehouse and did some tests with the Blaylock EZ Jack and Wheel Chock part #EZ-JACK for you. It looks like the highest point on the…

view full answer...

Answer 4

The Andersen Rapid Jack part #AM3620 and Blaylock EZ Jack and Wheel Chock part #EZ-JACK are both excellent options to help quickly and effectively change a trailer tire. I spoke with each of the respective manufacturers but neither we able to give…

view full answer...

Answer 5

The only option I have for you to store a torsion axle trailer with the wheels off the ground is by using jack stands, the Powerbuilt Unijack Bottle Jack part #ALL620471 would be a good option as they have built-in bottle jacks and offer up to…

view full answer...

Answer 6

The Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers #EZ-JACK can fit trailers with leaf springs. If you check out the picture I attached you can see it used on a leaf spring trailer just like yours.

view full answer...

Answer 7

The 24x60 etrailer Cargo Carrier for RV Bumper - Steel #e99049 will work for your 2020 Rockwood Roo 235S as long as the rear bumper is 4" wide and either 4" or 4-1/2" tall. This cargo carrier has a 500lb weight capacity and has the…

view full answer...

Answer 8

Most of the go power solar charge controllers do not have an SAE plug on the side wall for a portable panel, as most of the panels have their own charge controller, so you'll want to confirm that the side plug goes directly to the battery. For a…

view full answer...

Answer 9

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

view full answer...

Answer 10

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 11

I checked directly with Go Power for you, and the model number is indeed GP-PV-190M for the solar panel in the Overlander expansion kit you asked about: - Go Power Overlander Expansion Kit - 190 Watt Solar Panel #34282182 So it is the exact same 190…

view full answer...

Answer 12

Yes you'd easily be safe to add another Go Power Overlander Expansion Kit #34282182 to your GoPower setup that has a 30 amp controller. You'd be close to the max amperage but you'd be under the 30 amps pretty easily even if they were at…

view full answer...