How Does The Nosing Edge Trim Attach to Sheet Metal

Question

Question:

Is there a slot in the rounded edge that the sheeting will slip into so it captures the edge of the metal?

asked by: Tim

1

Helpful Expert Reply:

The Nosing Edge Trim - Enclosed Trailer - 93-1/2" Long x 1" Tall x 3/16" Deep - Aluminum part # 362555-955 has a rolled or rounded edge to finish off the sharp edges of the trailer. It does not have a slot that the sheeting will slip into. It will need to be attached with screws (not included). I have attached a photo and video for your reference.

expert reply by: Heather A

1

click to enlarge

Answer 1

We have the Nosing Edge Trim #362555-955 which is 1" wide with a 3/16" edge lip. The trim is 93-1/2" long and has an aluminum construction. Since it is aluminum it will bend fairly easily.

view full answer...

Answer 2

I took a look in the online version of the owner's manual for a 2016 Ford F-150 and there is a fuse for the trailer brake control module in position 49 in the fuse block in the engine compartment, which is a 30 amp fuse that I recommend…

view full answer...

Answer 3

My contact at Redline told me that the outside diameter of the Chrome Trim #SA1012ET would be right at 5/16 of an inch and the inner diameter 1/8 of an inch. He said the trim isn't a perfect circle so the dimensions fluctuate a little bit.…

view full answer...

Answer 4

In regards to the Nosing Edge Trim part #362555-955, the overall depth at the deepest point is 3/16" thick. I have attached a photo below to help clarify.

view full answer...

Answer 5

The best way to power the interior lights in your trailer is with its own independent battery. You will not want to use the breakaway battery. The breakaway battery is only designed to operate the breakaway and will drain extremely quickly,…

view full answer...

Answer 6

There isn't really a right or wrong answer when it comes to selecting trim for the tops and sides of your trailer. It is really just about selecting the best shape/style/size that fits your contours the best. Trim like the Top Rail Trim for…

view full answer...

Answer 7

I wasn't able to cross-reference these numbers but if you're looking for new bearings/races and seals all you need to do is note the capacity or measure. The easiest method would be to crawl under the trailer and look for the axle tag on the…

view full answer...

Answer 8

According to the Dexter Axle instructions, the bolts that are used to install the E-Z Flex Equalizer for 1-3/4" Double Eye Springs #013-144-03 should be torqued in the range of 30 - 50 ft-lbs (see attached cutout). Attached is an installation…

view full answer...

Answer 9

Yes. You can make connections to the battery on your 2020 Tesla Model Y in the same manner that you would on a standard, non-EV. You will need to start with a 4 way like the Tekonsha ZCI Kit #119250KIT which offers you a solution that doesn't…

view full answer...

Answer 10

For your 2021 Tesla Model Y I recommend the Curt Echo Wireless Trailer Brake Controller #C51180. The echo plugs in line with your existing 7-way at the back of your vehicle. It is controlled through your smartphone via Bluetooth. Since this does not…

view full answer...

Answer 11

I contacted the manufacturer asking if they had a diagram on how to adjust the tension. Please note the attached image showing where to use an Allen wrench to turn the adjuster on the LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen,…

view full answer...

Answer 12

The HydraStar Disc Brake Kit item #HSE7K-TR1SO is designed for trailers with 7K axles and an 8 on 6-1/2" bolt pattern. This conversion kit would work great on your 42 1/2 foot travel trailer. If you need new hubs with the brake kit you will want…

view full answer...