What are the Dimensions of the Dutton-Lainson Covered Hand Winch DL17027

Question

Question:

overall rough dimensions of the main body, LxWxH

asked by: Richard A

1

Helpful Expert Reply:

The Dutton-Lainson Covered Hand Winch # DL17027 is going to be 10" long (at its' longest point) x 5-1/2" wide x 6-1/4" tall; the base is going to be slightly shorter at roughly 8-1/2" long and the handle is 9-1/2" long. I've attached a photo to better illustrate these measurements, as well as our product review video that also shows some measurements that you might be interested in.

expert reply by: Erik B

1

click to enlarge

Answer 1

For your 2007 Crest pontoon boat, I recommend using the Fulton XLT 2-Speed Trailer Winch #F142425. This is a top-of-the-line boat trailer winch, it has 2-speed gearing for faster retrieval, and a corrosion-resistant zinc finish and polypropylene…

view full answer...

Answer 2

The Replacement Solenoid Valve #T4748800 that you referenced actually fits with the 19' Titan Steel Brake Line Tubing #T4336000 which has a 3/16" diameter so it will fit perfectly with your brake line. I have attached an installation video…

view full answer...

Answer 3

What I recommend is the Bulldog winch #BDW15019. With it you are able to add the wireless remote, #BDW20212 sold separately, to operate the winch from up to 100 feet away. The winch does have a free spool mode so you can pull the line out quickly. I…

view full answer...

Answer 4

I went out to our warehouse to take a look at the Dutton-Lainson Hand Winch #DL15337 that you referenced in your question. I measured a height of right at 5-1/4 inches and a total length of 8 inches. It has a width of 5-1/2 inches. The mounting base…

view full answer...

Answer 5

There could be two possible reasons as to why the clutch is not engaging when you are pulling in your boat with the Dutton-Lainson TW4000 StrongArm Electric Winch part #DL25200. The first reason is the simplest to fix and it entails tightening the…

view full answer...

Answer 6

You should be able to make your Bearing Buddy Bearing Protectors #BB37SR fit by placing them in the freezer. The cold temperatures will cause the steel to shrink slightly but they will likely have to sit in the freezer overnight to ensure they get…

view full answer...

Answer 7

We don't carry the Knot Autoflex couplers, but we do have a solution that could work for you. You could assemble a solution of parts we offer that would consist of: • JIF Marine 2500 lb 2-speed hand winch, part #315-W2500D • Winch Stand, part…

view full answer...

Answer 8

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 9

The Dutton-Lainson StrongArm Electric Winch, #DL25200, itself is not trailer-specific, so you could use it with any trailer provided that it is mounted properly. We have several mounting kits available depending on where you would need to mount the…

view full answer...

Answer 10

I spoke to my contact at Dutton Lainson and they informed me that the Dutton Lainson Adapter plate part #DL24059 that you referenced is 7.7 inches long and 5.50 inches wide.

view full answer...

Answer 11

I spoke with my contact at Dutton-Lainson regarding the TW4000 StrongArm Electric Winch #DL25200 referenced in your question. She stated that the winch is not designed to serve as a boat strap when traveling so this is not recommended. Once pulled in…

view full answer...

Answer 12

Yes, to replace the plastic housing on the Dutton-Lainson Covered Hand Winch #DL17027 you just need the part #DL62QR. I confirmed this with my contact at Dutton-Lainson.

view full answer...

What are the Dimensions of the Dutton-Lainson Covered Hand Winch DL17027

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching