Drop Shank that Fits 2-1/2 inch Hitch for Use with Curt MV Weight Distribution System
Question:
Have a 2019 Ford F-250 4x4 superduty. Raised leveled 3 inches with a 26ft trailer. Looking at curt distribution sway hitch. Can I use a sleeve to adapt the 2 in for my 2 1/2. And will I need to purchase a drop hitch
asked by: Tony
Helpful Expert Reply:
Since you'd need more drop than what the shank of the Curt MV Weight Distribution System # C17062 provides you may as well go with a drop shank that fits a 2-1/2 inch hitch directly without needing the adapter sleeve like the Curt shank part # C17132 which fits the hitch size and provides up to 10 inches of drop.
Products Referenced in This Question
Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 10 Inch Drop
- Trunnion - 9 Inch Drop
- Round - 13 Inch Rise
- Trunnion - 13 Inch Rise
- CURT
more information >
Product Page this Question was Asked From
Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 10K GTW, 1K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Does Not Allow Backing Up
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 10K GTW, 1K TW
- Video: Review of CURT Weight Distribution Hitch - 1K TW MV WD With Sway Control - C17062
- Shop: Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Q&A: Correct Weight Distribution Shank for 2017 Ford F-250 with 6 Inch Lift and 37 Inch Tires
- Q&A: Does Weight Distribution Hitch Head Setting Affect Spring Bar Tension
- Q&A: Should Vehicle Sit Level When Weight Distribution System is Used and Set Up
- Q&A: Weight Distribution Hitch For My 2022 Ram 2500Towing A 3,500 Pound Horse Trailer
- Search Results: 12 inch drop ball mount
- Search Results: curt drop hitch
- Search Results: curt weight distribution hitch
- Shop: Reese Pro Round Bar Weight Distribution w Sway Control - Round Bar - 11,500 lbs GTW, 1,150 lbs TW
- Shop: Trailer Hitch
- Search Results: weight distribution hitch
- Q&A: Can You Convert to 2-1/2 Inch Shank From 2 Inch With Reese Weight Distribution Hitch
- Shop: Brake Controller
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 14K GTW, 1.4K TW
- Search Results: sway control trailer hitch ball mount
- Shop: Trailer Wiring
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW
- Shop: Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 10K GTW, 1K TW
- Search Results: drop hitch
- Shop: Suspension Enhancement
- Shop: Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Determining Trailer Tongue Weight
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How to Keep LED Turn Signal Lights on Toolbox From Flashing with Brake Pedal Pressed