Availability of Optronics Beehive Trailer Marker Light with Red Lens

Question

Question:

does this light come in red lens? Thank you

asked by: William F

0

Expert Reply:

The Sealed Beehive Trailer Side Marker Light is indeed available with a red lens, in an LED version as part # MCL21RB.

You might also need a flush mount grommet, # A54GB or a wire pigtail, part # A46PB.

expert reply by: Mike L

0

Answer 1

Since you do not know your lock core/key number, the best option is going to be to replace the entire lock core with the Replacement Lock Core and Keys for Yakima Rack and Roll Trailer #8880553 (S307) or #8880551 (S305). As long as your lock is…

view full answer...

Answer 2

For your Yakima Rack And Roll 78" trailer #Y08107 you will want to use Replacement Tail Block Locking Assembly for Yakima Rack and Roll Trailer 2015 and Newer - Qty 1 #8880334 and then the Replacement Lock Core and Keys for Yakima Rack and Roll…

view full answer...

Answer 3

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 4

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 5

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 6

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 16 inch tire will not fit on a 16.5 inch wheel. You would either need to get new 16 inch wheels with the proper bolt pattern to match what the hubs require or to get your existing wheels you would need to go with 16.5 inch tires. You mentioned you…

view full answer...

Answer 9

I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be 3/8" shorter but that is still close…

view full answer...

Availability of Optronics Beehive Trailer Marker Light with Red Lens

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching