Can Torklift StableLoads Fit with Aftermarket Sway Bar of 2014 Mercedes Benz Sprinter

Question

Question:

Hello, Can this be used in conjunction with a rear sway bar ? Do you sell or suggest one specific brand if so? I was looking into the Hellwig sway bar for my 2014 170 sprinter as we are converting it to an adventure mobile. Thank you

asked by: Dustin

0

Expert Reply:

Yes, you can use the TorkLift StableLoads like part # TLA7311 with aftermarket sway bars. The two products are far enough away from each other they would not interfere in any way. While the picture I attached may not be a Sprinter like your 2014 model it does point out where the sway bar and Stableloads both install to give you an idea how far apart they are.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I talked to some of our guys down in our installation bays and based on the feedback I received, I definitely recommend the Timbren Suspension Enhancement System #TFR350SDJ for your 2020 Ford F-350 Super Duty. The TorkLift StableLoad #TLA7310S work…

view full answer...

Answer 2

When people are looking for suspension enhancement for their trucks like your 2023 Ford F-350 I generally don't like to recommend Timbrens unless the vehicle is going to be basically towing heavy all of the time as they are known to make the ride…

view full answer...

Answer 3

That's a good question, and you will keep the factory overload spring on your 2020 Ford F-350 Super Duty, as they are designed to fit directly over that spring. The correct SuperSprings kit for your '20 F-350, which will also work with your…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

I recommend looking into the SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA16MXKT to pair with the Firestone Ride-Rite Air Helper Springs #F2613 on your 2022 Chevrolet Silverado 2500HD. These are confirmed to fit while the…

view full answer...

Answer 6

From the looks of the photo you have attached it appears you have a lower overload spring, not an upper overload spring that is required for the TorkLift StableLoad Suspension Upgrade for Upper Overload Springs part #TLA7200 to work. This kit will…

view full answer...

Answer 7

Yes, you will need to drill into the leaf springs on your 2022 Ford F-250 Super Duty whether you go with the standard TorkLift StableLoad #TLA7311 or the Stainless Steel version #TLA7311S. I checked with TorkLift and it looks like you'll need to…

view full answer...

Answer 8

Yes, you can upgrade your current leaf springs with the higher rated 4,500 lb part #e27SR and you'll be fine. The suspension might be a little stiffer but you wouldn't have to worry about it going flat like what you have now.

view full answer...

Answer 9

It sounds like you're looking for the Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2020 Nissan Frontier. These are great for towing or hauling and will work to reduce sag/squat without minimizing axle travel.

view full answer...

Answer 10

For your 2018 Toyota Tundra the suspension enhancement I recommend is the Timbren kit part #TABSOSR because this kit installs easily, gives you the suspension support you need to greatly reduce the sag, and because it doesn't require monitoring…

view full answer...

Can Torklift StableLoads Fit with Aftermarket Sway Bar of 2014 Mercedes Benz Sprinter

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching