What is the Outer Diameter Of the Bulldog Rack-and-Gear Jack # BD161300

Question

Question:

what is the outside diameter of the #bdo018006 and what is the space measurement between the geer teeth. I have an atwood 1980 model weld on jack that has an inside diameter of 11/2 inch and 1/4 inch between geer teeth. Cant find atwood replacement part but bulldog part look similar.

asked by: M F

0

Expert Reply:

I pulled the Bulldog Rack-and-Post Assembly, # BD018006, and found that the outer diameter of this jack measures slightly wider than 1-1/2 inches at 1.64, or 1-21/32, inches. The gear teeth spacing on this jack is .15, or 5/32, of an inch.

Most of the time jacks are not compatible between manufacturers.

expert reply by: John H

0

Answer 1

The tire/wheel combo we offer that has a 6 on 5-1/2 bolt pattern and has the highest capacity is the Dexstar ST225/75R15 Radial Tire With 15 Inch Wheel, part #AM32680. This is a Load Range E tire that has a weight capacity of 2,830 lbs at 80 psi.…

view full answer...

Answer 2

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb…

view full answer...

Answer 3

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 7

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

What is the Outer Diameter Of the Bulldog Rack-and-Gear Jack # BD161300

Product Page this Question was Asked From

Continue Researching