Compatibility of Mighty Cord RV Power Cord Adapter With Uninterruptible Power Supply

Question

Question:

Good afternoon, I have a Tripplite model SU3000RTXL3U UPS that has a NEMA L5-30P input, but the wall outlet I have available is a NEMA 5-20R. I was looking at your Mighty Cord RV Power Cord Adapter - 30 Amp Twist Lock Female to 15 Amp Male, product number A10-1530DBK to adapt the cable to the outlet. Can you tell me if this product will meet my requirement? Thank you.

asked by: James

1

Helpful Expert Reply:

According to Mighty Cord, the # A10-1530DBK power cord adapter will work just fine for you, and would be compatible with the NEMA 5-20R outlet.

expert reply by: Mike L

1

Answer 1

If the rear end of your vehicle sags significantly when the trailer is hooked up then you could have an unsafe condition and your front end and tires will not wear properly. The weight is taken off of the front wheels of the vehicle and can cause…

view full answer...

Answer 2

I do have an option for you but all of our power inlets are 30 or 50 amps as that is what you will find at an RV park. That said, you can use an adapter if you need to hook up to a 15 or 20 amp outlet. For a 30 amp RV inlet I recommend Mighty Cord…

view full answer...

Answer 3

The Optronics LED Step Light #ILL86BCB that you mention does not have a sensor that operates the light, this light is powered by 12V and has constant power to the unit. Additionally, this light measures 4" tall x 2-1/2" wide x 1-5/16"…

view full answer...

Answer 4

Absolutely. Whenever the trailer weighs in at least half of the weight of the tow vehicle a weight distribution system is recommended. For your application I recommend checking out the Blue Ox TrackPro Weight Distribution w/ Sway Control #BLU36FR.…

view full answer...

Answer 5

To be on the safe side, we will assume the maximums; trailer weight of 4,000 pounds and tongue weight of 425 pounds. When selecting a weight distribution system, the most important thing is properly matching tongue weights. That being said, you never…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

The wheels for your ST215/75R14 sized tire on your 2022 Coleman Lantern 17B are 14" X 5-1/2" wheels with a 5 on 4-1/2 bolt pattern. The Karrier ST215/75R14 Radial Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C, part…

view full answer...

Answer 10

Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…

view full answer...

Answer 11

The 15,000 Btu Furrion air conditioner is what I would recommend and what I have on my trailer. Since it is an enclosed trailer I'm guessing you want the manual distribution box. You can choose from the following based on color: -Furrion Chill HE…

view full answer...

Compatibility of Mighty Cord RV Power Cord Adapter With Uninterruptible Power Supply

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching