Will K-Source Snap & Zap Towing Mirrors Affect Cameras on Factory Mirrors of 2020 Ram 1500

Question

Question:

Truck on order. Has surround cameras that preclude ordering the trailer towing mirrors. Some kind of conflict. The cameras not mentioned in your previous answer about blind spot etc. How will this play with the surround cameras? Im assuming the extendable factory mirrors dont implement the camera in the mirror - just a guess. Maybe the cameras not prevented from functioning in the standard mirror with this clipon attached?

asked by: Steve G

1

Helpful Expert Reply:

The K-Source Snap & Zap Custom Towing Mirrors # KS80730 that you referenced will not interfere or block the cameras on the factory mirrors for your 2020 Ram 1500. These are a confirmed fit for your truck as long as you don't have the OEM extendable mirrors.

The factory cameras in question are located on the underside of the stock mirrors, and these K-Source Towing Mirrors come with pre-cut sections that line up to the cameras so they remain unobstructed with the aftermarket units in place. I have attached a short video review that you can check out as well.

expert reply by: Chris R

1

Answer 1

Yes! The K-Source Snap & Zap Custom Towing Mirrors - Snap On #KS80730 has a clear lens to see the turn signal indicator as well as cutouts for the bottom sensor and under lights. I went ahead and attached a great review video that goes over all…

view full answer...

Answer 2

For your 2022 Ram 1500, I recommend the K-Source Snap & Zap Custom Towing Mirrors #KS80730. These mirrors, when installed, retain your truck's OEM look to your mirrors, but also provide 3-3/8" of additional visibility, needed for towing.…

view full answer...

Answer 3

Yes, the K-Source Snap & Zap Custom Towing Mirrors #KS80730 will fit your 2022 Ram 1500 Big Horn. The incorrect fit has to do only with the Tradesman and Rebel models with the optional 6 x 9 manual mirrors. Since you do not have either of these,…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

view full answer...

Answer 6

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...

Will K-Source Snap & Zap Towing Mirrors Affect Cameras on Factory Mirrors of 2020 Ram 1500

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching