Is Hub/Drum Included with 3500 lb AKEBRK-35L-SA Trailer Brake Assembly
Question:
Are the Hub/Drums Included with 3500 lb AKEBRK-35L-SA Trailer Brake Assembly
asked by: Don F
Helpful Expert Reply:
The hub drums are sold separately. The # AKEBRK-35L-SA (left side) and # AKEBRK-35R-SA (right side) self-adjusting trailer brake assemblies are intended for a 3500 lb capacity axle. The # BRKH10BS mounting hardware is sold separately.
Typically, a drum for a 3500 lb axle would have a 5 lug on 4-1/2 inch bolt circle and would use a L68149 inner and a L44649 outer wheel bearing, although the wheel bolt pattern could possibly be different. If your existing hubs have the 5 on 4-1/2 bolt pattern, I'd recommend the # AKHD-545-35-EZ-K hub/drum. The bearings, races, grease seal, grease cap and lug nuts are included.
If your wheel bolt pattern is different, such as 5 on 4-3/4, 5 on 5, 5 on 5-1/2 or 6 on 5-1/2, use the provided link to see the other hubs with different bolt patterns we offer for 3500 lb axles. If you're not certain of what bolt pattern your current hubs are, I'll link you to an article that explains how to figure it out.
Products Referenced in This Question
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Mounting Hardware for 10" Single Brake Assembly
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Product Page this Question was Asked From
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can The Mounting Studs Be Removed From The Electric Brake Assembly AKEBRK-35L-SA?
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer
- Q&A: Do Self Adjusting Trailer Brake Assemblies Have to be Manually Adjusted Initially
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Replacement Electric Trailer Brake Assemblies For a 2018 Jayco Jay Feather 29QB Travel Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Brake Assembly for Axletek 44-GG
- Q&A: Correct Replacement Idler Hubs for Champion Boat Trailer