Trailer Hitch for 2013 Kia Rio EX Sedan
Question:
Trailer hitch for 2004 Hyundai fit a 2013 Kia Rio ex sedan
asked by: Deborah A
Expert Reply:
I have a solution for you, but a hitch from a 2004 Hyundai Accent will not fit on a 2013 Kia Rio Ex sedan; I understand the confusion since some of the hitches available for the 2013 Rio are also a fit on some Hyundai and Volkswagen models. Instead, you will want to use the Draw-Tite # 24884, which is a confirmed fit on the 2013 Kia Rio sedans.
If you're going to be towing a small, lightweight trailer with this hitch, you'll need a few other components for a complete towing setup. I've gone ahead and provided a quick list of those parts below.
Wiring- Curt # C56157
Ball Mount- Draw-Tite # 3594
Hitch Ball- 1-7/8" ball # 19256 or 2" ball # 19258
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Use of Any Adapter Does Decrease the Hitch Tongue Weight Capacity by Half
- Q&A: Trailer Hitch Fit For 2019 Mercedes-Benz E-300 and E-400
- Article: Rust Prevention
- Q&A: How Hard is it to Install a Trailer Hitch on a 2014 Kia Rio
- Q&A: Is Draw-Tite Trailer Hitch # 24883 Hidden Behind the Bumper on a 2013 Kia Rio
- Q&A: Longer Ball Mount Recommendation for Adding Distance Between Hitch Ball and Bumper
- Q&A: Draw-Tite Hitch Ground Clearance on 2012 Hyundai Accent
- Q&A: 2005 Ranger Trail Boat Trailer Replacement Hub Bearings and Races for Oil Bath
- Article: Trailer Hitch Receiver Sizes
- Article: Trailer Tire Sizing
- Article: My Trailer Hitch Doesn't Fit
- Article: What is Overlanding? How to Start your Overlanding Journey
- Article: Best Bike Racks for Electric Bikes
- Article: What Do I Need To Tow A Trailer?