Can TracRac Replacement Rubber Block Hold Up to Multiple Installations

Question

Question:

For your reference Im interested in taking the rack off and on as needed. Will this block return to shape and maintain its integrity for off and on use of the rack? Or will I need to replace the block after a few uses? 2019 Ram 1500 New Body...

asked by: NYNJ8

0

Expert Reply:

The Replacement Rubber Block for TracRac Base Rail Installation # TARB-11032-1 won't have a problem maintaining its integrity/shape as you remove and re-install the ladder rack as needed on your truck. Just make sure all your hardware is tightened down appropriately when installing everything each time.

I have attached a short video review on this component that you can check out as well.

expert reply by: Chris R

0

Answer 1

The Replacement Rubber Block for Base Rail Installation of TracRac Sliding Ladder Racks - Qty 1 #TARB-11032-1 is the correct replacement for the TracRac SR Sliding Truck Bed Ladder Rack w/ Over-the-Cab Extension #TH43002XT-782EX. This replacement…

view full answer...

Answer 2

Yes, the pocket nut in the Replacement Hardware Kit for TracRac Sliding Ladder Rack Base Rails #TAHD-21501 can be found on our site using part #TA01-2100N. This part comes in a quantity of one so you will need to place your order accordingly.

view full answer...

Answer 3

You will need the Replacement Rubber Block for Base Rail Installation of TracRac Sliding Ladder Racks - Qty 1 #TARB-11032-1. You can get the pocket nut separately #TA01-2100N, but the bolts and other hardware are only available in the Replacement…

view full answer...

Answer 4

Replacement Pocket Nut for TracRac SR Sliding Ladder Rack Base Rails - Qty 1 #TA01-2100N has a threaded hole that is 3/8-16.

view full answer...

Answer 5

The long plastic shims have been replaced with smaller ones and they are now made of rubber. For a long bed truck you will need 6 of #TA8527645001. For a short bed you will need just 4 of #TA8527645001.

view full answer...

Answer 6

The replacement rubber blocks #TARB-11032-1 for your TracRac SR sliding truck bed rails #TH21501 can be removed once installed. But I wouldn't recommend removing and re-installing often because the rubber blocks tend to dry out. It's a good…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

With the weight of your camper I recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL35FJ. I prefer these as they have the internal jounce bumper which helps to reduce the bounce that is often associated with towing a trailer and…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Can TracRac Replacement Rubber Block Hold Up to Multiple Installations

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching