Parts Needed to Convert Electric Brakes to EOH System on Triple 7K Axle Toy Hauler
Question:
Triple axle 7k 2001 take 3 car hauler I want to convert my electric breaks to EOH breaks do y’all sell a complete kit for triple axle trailer ?
asked by: Kyle W
Expert Reply:
We do have a complete kit to convert your triple 7K axle trailer to an EOH setup! I recommend using the HydraStar Disc Brake Kit w/ Actuator # HSE7K-TR1 which come with the EOH actuator, disc brake hub/rotors, and the brake line parts needed for all 3 axles. The only other parts you'll need are a junction box like # HS381-9000 and a breakaway kit like # 50-85-315 (but you should have both of these since you currently have electric brakes). The junction box gives you a 7-Way connector on your trailer and an easy way to organize all of your wiring while the breakaway kit will activate your trailer brakes in the event that your trailer comes uncoupled.
The bearings and seals should match up with what you currently have but it wouldn't hurt to double check just in case. This brake kit uses inner bearing # 25580, outer bearing # 14125A, and grease seal # 10-63.
Products Referenced in This Question
Unitized Oil Seal for Trailer Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Oil Seals
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- Dexter
more information >
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Wiring Kit for Hydrastar Electric Over Hydraulic Actuators
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Wiring
- Hydrastar
more information >
Product Page this Question was Asked From
Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 1/2" Studs - 8 on 6-1/2 - 7K
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 7000 lbs Axle
- Hydrastar
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Triple Axle Disc Brake Conversion Kit
- Q&A: How To Run Steel and Rubber Lines For Disc Brakes In Trailer
- Q&A: What is the Difference Between the HSE7K-TRI and HSE7K-TR1SO
- Q&A: Hydraulic Brake Kit For a Ez 4 Kaufman Car Hauler Trailer With 7,000LB Axles
- Q&A: Parts to Convert 2017 Grand Design Momentum 376TH to Electric Over Hydraulic Disc Brake
- Q&A: Will Hydrastar Disc Brake Kit Fit 7k Lippert Axles
- Q&A: Hydrastar Disc Brake Kit For a 2018 Grand Design Momentum Triple Axle Toy Hauler With 7,000LB Axles
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
Wade B.
6/29/2020
Just bought your 102"x32'24K eoh disc brake 5th wheel tandem trailer and the trailer won't recognize when the brakes are applied. Is there a relay or a way to wire around to override this problem so my brakes will work?