Troubleshooting Running Light Circuit Not Active When Hazards are On
Question:
I have 2002 good expedition 5.4 4 wheel drive The trailer hookup for lights etc. Everything is working except one running light if hazards are on the one running light that works stays red and the one that didnt f ericalashes like it should
asked by: Erica M
0
Expert Reply:
Sounds like your trailer doesn't have a sufficient enough of a ground circuit to allow the functions to all work like they should. Try improving the main ground circuit of the trailer if you can and that should fix the issue. Make sure the wire is connected solidly to a clean metal surface. You can also try running ground wires for all of the lights back to the main ground and that should help as well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150
- Article: Trailer Lighting Requirements